Hi all,
On Tue, 13 Oct 2009 11:49:48 +0200, Jean Delvare wrote:
> I2C bus being setup too fast sounds more likely. It might be worth
> adding an arbitrary delay after initialization, just to see if it
> helps. Not sure where though, as I'm not familiar with the Powermac
> initialization steps. Maybe right before i2c_add_adapter() in
> i2c_powermac_probe?
Tim, can you please give a try to this patch? Obviously your machine
will take 5 additional seconds to boot, and this isn't meant as a real
fix, but if it helps, this will be an interesting hint for further
debugging attempts.
--- kernel32.orig/drivers/macintosh/therm_adt746x.c
+++ kernel32/drivers/macintosh/therm_adt746x.c
@@ -380,6 +380,7 @@ static int probe_thermostat(struct i2c_c
if (thermostat)
return 0;
+ msleep(5000);
th = kzalloc(sizeof(struct thermostat), GFP_KERNEL);
if (!th)
return -ENOMEM;
--
Jean Delvare
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
