From: Wolfgang Grandegger <w...@denx.de>
This patch adds the MPC5121 to the list of supported devices,
enhances the doc of the "clock-frequency" property and removes
the obsolete "cell-index", "device_type" and "fsl-i2c" property.
Furthermore an example for the MPC5121 has been added.
Signed-off-by: Wolfgang Grandegger <w...@denx.de>
Reviewed-by: Wolfram Sang <w.s...@pengutronix.de>
---
Documentation/powerpc/dts-bindings/fsl/i2c.txt | 30 +++++++++++++++++------
1 files changed, 22 insertions(+), 8 deletions(-)
diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt
b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
index b6d2e21..50da203 100644
--- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
@@ -2,15 +2,14 @@
Required properties :
- - device_type : Should be "i2c"
- reg : Offset and length of the register set for the device
+ - compatible : should be "fsl,CHIP-i2c" where CHIP is the name of a
+ compatible processor, e.g. mpc8313, mpc8543, mpc8544, mpc5121,
+ mpc5200 or mpc5200b. For the mpc5121, an additional node
+ "fsl,mpc5121-i2c-ctrl" is required as shown in the example below.
Recommended properties :
- - compatible : compatibility list with 2 entries, the first should
- be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor,
- e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one
- should be "fsl-i2c".
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
@@ -24,25 +23,40 @@ Recommended properties :
Examples :
+ /* MPC5121 based board */
+ i...@1740 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ reg = <0x1740 0x20>;
+ interrupts = <11 0x8>;
+ interrupt-parent = <&ipic>;
+ clock-frequency = <100000>;
+ };
+
+ i2ccont...@1760 {
+ compatible = "fsl,mpc5121-i2c-ctrl";
+ reg = <0x1760 0x8>;
+ };
+
+ /* MPC5200B based board */
i...@3d00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- cell-index = <0>;
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
interrupt-parent = <&mpc5200_pic>;
fsl,preserve-clocking;
};
+ /* MPC8544 base board */
i...@3100 {
#address-cells = <1>;
#size-cells = <0>;
- cell-index = <1>;
compatible = "fsl,mpc8544-i2c", "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
clock-frequency = <400000>;
};
-
--
1.6.2.5
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
