> -----Original Message----- > From: David Miller [mailto:da...@davemloft.net] > Sent: Tuesday, April 13, 2010 2:34 AM > To: grant.lik...@secretlab.ca > Cc: John Linn; net...@vger.kernel.org; linuxppc-...@ozlabs.org; jwbo...@linux.vnet.ibm.com; > eric.duma...@gmail.com; john.willi...@petalogix.com; michal.si...@petalogix.com; jty...@cs.ucr.edu > Subject: Re: [PATCH 2/2] [V5] Add non-Virtex5 support for LL TEMAC driver > > From: Grant Likely <grant.lik...@secretlab.ca> > Date: Fri, 9 Apr 2010 12:10:21 -0 > > > On Thu, Apr 8, 2010 at 11:08 AM, John Linn <john.l...@xilinx.com> wrote: > >> This patch adds support for using the LL TEMAC Ethernet driver on > >> non-Virtex 5 platforms by adding support for accessing the Soft DMA > >> registers as if they were memory mapped instead of solely through the > >> DCR's (available on the Virtex 5). > >> > >> The patch also updates the driver so that it runs on the MicroBlaze. > >> The changes were tested on the PowerPC 440, PowerPC 405, and the > >> MicroBlaze platforms. > >> > >> Signed-off-by: John Tyner <jty...@cs.ucr.edu> > >> Signed-off-by: John Linn <john.l...@xilinx.com> > > > > Picked up and build tested both patches on 405, 440, 60x and ppc64. > > No build problems found either built-in or as a module. > > > > for both: > > Acked-by: Grant Likely <grant.lik...@secretlab.ca> > > Ok, both applied to net-next-2.6, thanks everyone for sorting this > out.
Great! Thanks David, appreciate the help. This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
