From: Grant Likely <grant.lik...@secretlab.ca> Date: Fri, 9 Apr 2010 12:10:21 -0600
> On Thu, Apr 8, 2010 at 11:08 AM, John Linn <john.l...@xilinx.com> wrote: >> This patch adds support for using the LL TEMAC Ethernet driver on >> non-Virtex 5 platforms by adding support for accessing the Soft DMA >> registers as if they were memory mapped instead of solely through the >> DCR's (available on the Virtex 5). >> >> The patch also updates the driver so that it runs on the MicroBlaze. >> The changes were tested on the PowerPC 440, PowerPC 405, and the >> MicroBlaze platforms. >> >> Signed-off-by: John Tyner <jty...@cs.ucr.edu> >> Signed-off-by: John Linn <john.l...@xilinx.com> > > Picked up and build tested both patches on 405, 440, 60x and ppc64. > No build problems found either built-in or as a module. > > for both: > Acked-by: Grant Likely <grant.lik...@secretlab.ca> Ok, both applied to net-next-2.6, thanks everyone for sorting this out. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev