Hi Sylvain: > Humm I see, here is the node I'm creating in the initial ramdisk, so > they are there before mdev is launched in one of my init scripts. [snip]
I additionally have "tty0 c 4 0" which might be important here, plus a lot of other crap (should clean up there...;-). I don't use a ramdisk, but have the /dev folder in the flash jffs2 image. In the init script, I say /bin/mount -t tmpfs ramfs /dev mdev -s mkdir /dev/pts mkdir /dev/shm chmod 1777 /dev/shm and then tty0 is gone. So to be honest I'm not absolutely sure it's necessary. My inittab contains ::sysinit:/etc/init.d/rcS ::respawn:-/bin/sh ::shutdown:/etc/init.d/rcS stop ::restart:/sbin/init ::respawn:/sbin/dropbear -F With this, I can access the board through ssh (dropbear). The dmesg output lists "console=tty0" as expected. All PSC's are in the device tree, btw, and available as serial ports. Hth, Albrecht. Traumziele - von Beschreibung bis Buchung jetzt kompakt auf den Reise-Seiten von Arcor.de! http://www.arcor.de/rd/footer.reise _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
