On 05/18/2010 01:36 AM, Richard Cochran wrote:
On Mon, May 17, 2010 at 01:05:54PM -0500, Scott Wood wrote:
+ - tmr_fiper1 Fixed interval period pulse generator.
+ - tmr_fiper2 Fixed interval period pulse generator.
MPC8572 and P2020 have fiper3 as well.
I doubt they really have a third fiper.
First of all, this signal is not routed anywhere on the boards.
OK, but that's a separate issue from whether it exists on the chip and
could be used on a different board.
Also, according to the documentation, it has no bit in the TMR_CTRL or the
TMR_TEMASK registers.
It does seem inconsistent -- but could just be bad docs.
Unless there is a bit in TMR_TEMASK, you cannot
get an interrupt from it.
If you cannot use the signal externally (in the "real" world) and you
cannot get an interrupt, what good is it to have such a periodic
signal? Polling the bit in the TMR_TEVENT to see when a pulse occurs
seems pointless.
Scott, you have connections, right? Can you clarify this for me?
I'll ask around.
-Scott
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
