On Mon, May 17, 2010 at 12:54 PM, Scott Wood <scottw...@freescale.com> wrote: > On Fri, May 14, 2010 at 02:41:29PM -0700, Shawn Jin wrote: >> Hi, >> >> Is mpc870 fully supported in the powerpc arch? I know it's an old >> processor but 8xx is still one of platforms in the powerpc arch. If >> it's not supported, how much effort will it be to resurrect mpc870 in >> the new arch considering we have substantial 8xx support? > > It should work, with appropriate board support -- MPC875 and MPC885 have > been used with arch/powerpc, and MPC870 is very similar (albeit with fewer > devices).
Thanks Scott. I found your implementation in the kernel. I use adder875 as my base to port my board support. But I'm having a problem in the last step to create the cuImage. You may know what I did wrong. The error message is as follows. WRAP arch/powerpc/boot/cuImage.my870 ppc_8xx-ld: arch/powerpc/boot/cuboot-my870.o: No such file: No such file or directory make[1]: *** [arch/powerpc/boot/cuImage.my870] Error 1 I believe the default cuboot-8xx.c should be enough for my board to fix up the board settings. I don't know why the linker was looking for this cuboot-my870.o object file. BTW, my kernel is 2.6.33.5. Thanks, -Shawn. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev