I'm porting a mpc870 board to the powerpc arch. The base is the adder-875 board. My first try to boot the cuImage.my870 is experiencing a machine check. And I have no clue where to look. Any help?
=> bootm 1000000 ## Booting image at 01000000 ... Image Name: Linux-2.6.33.5 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 747319 Bytes = 729.8 kB Load Address: 00400000 Entry Point: 004004d4 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Bus Fault @ 0x00404c40, fixup 0x00000000 Machine check in kernel mode. Caused by (from msr): regs 07d1cb80 Unknown values in msr NIP: 00404C40 XER: 00000000 LR: 00404C24 REGS: 07d1cb80 TRAP: 0200 DAR: 00000001 MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00 GPR00: 00404D50 07D1CC70 00000000 00000004 007FFF0C 00000001 0040AAB8 726F6F74 GPR08: 3D2F6465 0059D958 FF0009C0 0059DDDC FF003C00 1014BAC4 07FFF000 00000001 GPR16: 007FFF0D 004004D4 00000001 007FFF00 07FF9D78 FFFFFFFF 00000000 07D5D2A0 GPR24: 007FFEC0 00800000 00000000 00000000 00000000 0059D958 004129BC 00000000 Call backtrace: machine check Thanks alot, -Shawn. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev