On Sat, 2010-07-03 at 20:21 +0200, lawrence rust wrote: > The Blue/White Apple PowerMac G3 and early G4's use a cmd64x compatible > IDE disk controller. E.g. lspci shows... > > 01:01.0 IDE interface: Silicon Image, Inc. PCI0646 (rev 07) > > Unfortunately the default pmac32 configuration does not include this > driver and so PowerMac G3's can't load a root filesystem. This is an > issue on a least Ubuntu since version 9.04, which uses the default > config as a starting point. > > Signed-off-by: Lawrence Rust <lawrence at softsystem.co.uk>
Shouldn't we just switch the whole thing to libata now anyways ? Cheers, Ben. > diff -uprN a/arch/powerpc/configs/pmac32_defconfig > b/arch/powerpc/configs/pmac32_defconfig > --- a/arch/powerpc/configs/pmac32_defconfig 2010-05-16 23:17:36.000000000 > +0200 > +++ b/arch/powerpc/configs/pmac32_defconfig 2010-07-03 20:11:10.000000000 > +0200 > @@ -738,7 +738,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y > # CONFIG_BLK_DEV_AEC62XX is not set > # CONFIG_BLK_DEV_ALI15X3 is not set > # CONFIG_BLK_DEV_AMD74XX is not set > -# CONFIG_BLK_DEV_CMD64X is not set > +CONFIG_BLK_DEV_CMD64X=y > # CONFIG_BLK_DEV_TRIFLEX is not set > # CONFIG_BLK_DEV_CS5520 is not set > # CONFIG_BLK_DEV_CS5530 is not set > > > > > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@lists.ozlabs.org > https://lists.ozlabs.org/listinfo/linuxppc-dev _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev