Change ACMD12 to AUTO_CMD12 to reduce the confusion.
ACMD12 might be confused with MMC/SD App CMD 12 (CMD55+CMD12 combo).
Signed-off-by: Roy Zang <tie-fei.z...@freescale.com>
---
drivers/mmc/host/sdhci-of-core.c | 2 +-
drivers/mmc/host/sdhci.c | 8 ++++----
drivers/mmc/host/sdhci.h | 10 +++++-----
3 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/mmc/host/sdhci-of-core.c b/drivers/mmc/host/sdhci-of-core.c
index dd1bdd1..d059805 100644
--- a/drivers/mmc/host/sdhci-of-core.c
+++ b/drivers/mmc/host/sdhci-of-core.c
@@ -155,7 +155,7 @@ static int __devinit sdhci_of_probe(struct of_device *ofdev,
}
if (of_get_property(np, "sdhci,auto-cmd12", NULL))
- host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
+ host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_AUTO_CMD12;
if (of_get_property(np, "sdhci,1-bit-only", NULL))
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a92566e..4b7b2d5 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -73,7 +73,7 @@ static void sdhci_dumpregs(struct sdhci_host *host)
sdhci_readl(host, SDHCI_INT_ENABLE),
sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
printk(KERN_DEBUG DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
- sdhci_readw(host, SDHCI_ACMD12_ERR),
+ sdhci_readw(host, SDHCI_AUTO_CMD12_ERR),
sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
printk(KERN_DEBUG DRIVER_NAME ": Caps: 0x%08x | Max curr: 0x%08x\n",
sdhci_readl(host, SDHCI_CAPABILITIES),
@@ -818,8 +818,8 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
mode = SDHCI_TRNS_BLK_CNT_EN;
if (data->blocks > 1) {
- if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12)
- mode |= SDHCI_TRNS_MULTI | SDHCI_TRNS_ACMD12;
+ if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_AUTO_CMD12)
+ mode |= SDHCI_TRNS_MULTI | SDHCI_TRNS_AUTO_CMD12;
else
mode |= SDHCI_TRNS_MULTI;
}
@@ -1112,7 +1112,7 @@ static void sdhci_request(struct mmc_host *mmc, struct
mmc_request *mrq)
#ifndef SDHCI_USE_LEDS_CLASS
sdhci_activate_led(host);
#endif
- if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) {
+ if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_AUTO_CMD12) {
if (mrq->stop) {
mrq->data->stop = NULL;
mrq->stop = NULL;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 8fb088c..dfe1c4a 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -32,7 +32,7 @@
#define SDHCI_TRANSFER_MODE 0x0C
#define SDHCI_TRNS_DMA 0x01
#define SDHCI_TRNS_BLK_CNT_EN 0x02
-#define SDHCI_TRNS_ACMD12 0x04
+#define SDHCI_TRNS_AUTO_CMD12 0x04
#define SDHCI_TRNS_READ 0x10
#define SDHCI_TRNS_MULTI 0x20
@@ -116,7 +116,7 @@
#define SDHCI_INT_DATA_CRC 0x00200000
#define SDHCI_INT_DATA_END_BIT 0x00400000
#define SDHCI_INT_BUS_POWER 0x00800000
-#define SDHCI_INT_ACMD12ERR 0x01000000
+#define SDHCI_INT_AUTO_CMD12_ERR 0x01000000
#define SDHCI_INT_ADMA_ERROR 0x02000000
#define SDHCI_INT_NORMAL_MASK 0x00007FFF
@@ -130,7 +130,7 @@
SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR)
#define SDHCI_INT_ALL_MASK ((unsigned int)-1)
-#define SDHCI_ACMD12_ERR 0x3C
+#define SDHCI_AUTO_CMD12_ERR 0x3C
/* 3E-3F reserved */
@@ -157,7 +157,7 @@
/* 4C-4F reserved for more max current */
-#define SDHCI_SET_ACMD12_ERROR 0x50
+#define SDHCI_SET_AUTO_CMD12_ERROR 0x50
#define SDHCI_SET_INT_ERROR 0x52
#define SDHCI_ADMA_ERROR 0x54
@@ -241,7 +241,7 @@ struct sdhci_host {
/* Controller cannot support End Attribute in NOP ADMA descriptor */
#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26)
/* Controller uses Auto CMD12 command to stop the transfer */
-#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<27)
+#define SDHCI_QUIRK_MULTIBLOCK_READ_AUTO_CMD12 (1<<27)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
--
1.5.6.5
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
