Hello.
On 08.02.2011 1:54, [email protected] wrote:
From: Tirumala Marri<[email protected]>
Enable gadget support
Signed-off-by: Tirumala R Marri<[email protected]>
Signed-off-by: Fushen Chen<[email protected]>
Signed-off-by: Mark Miesfeld<[email protected]>
---
drivers/usb/gadget/Kconfig | 22 ++++++++++++++++++++++
drivers/usb/gadget/gadget_chips.h | 9 +++++++++
2 files changed, 31 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 5df8a8d..de7c10b 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -365,6 +365,28 @@ config USB_GADGET_MUSB_HDRC
This OTG-capable silicon IP is used in dual designs including
the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
+# dwc_otg builds in ../dwc_otg along with host support
+config USB_GADGET_DWC_HDRC
+ boolean "DesignWare USB Peripheral"
+ depends on DWC_OTG_MODE || DWC_DEVICE_ONLY
Patch 10 should precede this one as it defines DWC_OTG_MODE and
DWC_DEVICE_ONLY.
+ select USB_GADGET_DUALSPEED
+ select USB_GADGET_SELECTED
+ select USB_GADGET_DWC_OTG
+ help
+ This OTG-capable Designware USB IP
+
+config USB_GADGET_DWC_OTG
+ boolean "OTG Support"
+ depends on USB_GADGET_DWC_HDRC
What's the point of this option if it gets auto-selected by
USB_GADGET_DWC_HDRC anyway?
WBR, Sergei
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev
