Hi, Apologies if this is the wrong forum for this message but I figured it was a good place to start.
We have a new P4040 based board and are having lots of fun trying to get our BDI3k to work with it. The BDI isn't able to get control/halt the processor. I can go into more details if anybody is really interested but I was mainly interested if anybody had tried this combo before and if they knew of any gotcha's, example BDI configs etc. At the moment suspecting HW issue around the reset but of course the HW team would like us to check that we're not doing dumb things from the SW/BDI side of things too. Thanks in advance Mark Pearson _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev