The ioctl interface in the Freescale DIU framebuffer driver is just a collection of miscellaneous functions which were only used in a one-time demo application that was never distributed. Plus, the ioctls were spread across two types (both conflicting), and the demo app didn't even use all of them.
Removing the ioctl interface also allows us to clean up the header file and remove other unusued stuff. Signed-off-by: Timur Tabi <ti...@freescale.com> --- There's a warning about dummy_ad_addr that will be fixed in a future patch. Documentation/ioctl/ioctl-number.txt | 2 - drivers/video/fsl-diu-fb.c | 157 ++++++++++------------------------ include/linux/fsl-diu-fb.h | 94 -------------------- 3 files changed, 44 insertions(+), 209 deletions(-) diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 3a46e36..6c83c07 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -108,7 +108,6 @@ Code Seq#(hex) Include File Comments 'E' 00-0F xen/evtchn.h conflict! 'F' all linux/fb.h conflict! 'F' 01-02 drivers/scsi/pmcraid.h conflict! -'F' 20 drivers/video/fsl-diu-fb.h conflict! 'F' 20 drivers/video/intelfb/intelfb.h conflict! 'F' 20 linux/ivtvfb.h conflict! 'F' 20 linux/matroxfb.h conflict! @@ -147,7 +146,6 @@ Code Seq#(hex) Include File Comments 'M' 01-16 mtd/mtd-abi.h conflict! and drivers/mtd/mtdchar.c 'M' 01-03 drivers/scsi/megaraid/megaraid_sas.h -'M' 00-0F drivers/video/fsl-diu-fb.h conflict! 'N' 00-1F drivers/usb/scanner.h 'O' 00-06 mtd/ubi-user.h UBI 'P' all linux/soundcard.h conflict! diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index bedf5be..db2abaf 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -37,6 +37,50 @@ #include <linux/fsl-diu-fb.h> #include "edid.h" +/* Minimum value that the pixel clock can be set to in pico seconds + * This is determined by platform clock/3 where the minimum platform + * clock is 533MHz. This gives 5629 pico seconds. + */ +#define MIN_PIX_CLK 5629 +#define MAX_PIX_CLK 96096 + +#define FSL_AOI_NUM 6 /* 5 AOIs and one dummy AOI */ + +/* INT_STATUS/INT_MASK field descriptions */ +#define INT_VSYNC 0x01 /* Vsync interrupt */ +#define INT_VSYNC_WB 0x02 /* Vsync interrupt for write back operation */ +#define INT_UNDRUN 0x04 /* Under run exception interrupt */ +#define INT_PARERR 0x08 /* Display parameters error interrupt */ +#define INT_LS_BF_VS 0x10 /* Lines before vsync. interrupt */ + +/* Panels'operation modes */ +#define MFB_TYPE_OUTPUT 0 /* Panel output to display */ +#define MFB_TYPE_OFF 1 /* Panel off */ +#define MFB_TYPE_WB 2 /* Panel written back to memory */ +#define MFB_TYPE_TEST 3 /* Panel generate color bar */ + +/* HW cursor parameters */ +#define MAX_CURS 32 + +struct diu_hw { + struct diu *diu_reg; + spinlock_t reg_lock; + __u32 mode; /* DIU operation mode */ +}; + +struct diu_addr { + __u8 __iomem *vaddr; /* Virtual address */ + dma_addr_t paddr; /* Physical address */ + __u32 offset; +}; + +struct diu_pool { + struct diu_addr ad; + struct diu_addr gamma; + struct diu_addr pallete; + struct diu_addr cursor; +}; + /* * These parameters give default parameters * for video output 1024x768, @@ -991,118 +1035,6 @@ static int fsl_diu_blank(int blank_mode, struct fb_info *info) return 0; } -static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd, - unsigned long arg) -{ - struct mfb_info *mfbi = info->par; - struct diu_ad *ad = mfbi->ad; - struct mfb_chroma_key ck; - unsigned char global_alpha; - struct aoi_display_offset aoi_d; - __u32 pix_fmt; - void __user *buf = (void __user *)arg; - - if (!arg) - return -EINVAL; - switch (cmd) { - case MFB_SET_PIXFMT: - if (copy_from_user(&pix_fmt, buf, sizeof(pix_fmt))) - return -EFAULT; - ad->pix_fmt = pix_fmt; - pr_debug("Set pixel format to 0x%08x\n", ad->pix_fmt); - break; - case MFB_GET_PIXFMT: - pix_fmt = ad->pix_fmt; - if (copy_to_user(buf, &pix_fmt, sizeof(pix_fmt))) - return -EFAULT; - pr_debug("get pixel format 0x%08x\n", ad->pix_fmt); - break; - case MFB_SET_AOID: - if (copy_from_user(&aoi_d, buf, sizeof(aoi_d))) - return -EFAULT; - mfbi->x_aoi_d = aoi_d.x_aoi_d; - mfbi->y_aoi_d = aoi_d.y_aoi_d; - pr_debug("set AOI display offset of index %d to (%d,%d)\n", - mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d); - fsl_diu_check_var(&info->var, info); - fsl_diu_set_aoi(info); - break; - case MFB_GET_AOID: - aoi_d.x_aoi_d = mfbi->x_aoi_d; - aoi_d.y_aoi_d = mfbi->y_aoi_d; - if (copy_to_user(buf, &aoi_d, sizeof(aoi_d))) - return -EFAULT; - pr_debug("get AOI display offset of index %d (%d,%d)\n", - mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d); - break; - case MFB_GET_ALPHA: - global_alpha = mfbi->g_alpha; - if (copy_to_user(buf, &global_alpha, sizeof(global_alpha))) - return -EFAULT; - pr_debug("get global alpha of index %d\n", mfbi->index); - break; - case MFB_SET_ALPHA: - /* set panel information */ - if (copy_from_user(&global_alpha, buf, sizeof(global_alpha))) - return -EFAULT; - ad->src_size_g_alpha = (ad->src_size_g_alpha & (~0xff)) | - (global_alpha & 0xff); - mfbi->g_alpha = global_alpha; - pr_debug("set global alpha for index %d\n", mfbi->index); - break; - case MFB_SET_CHROMA_KEY: - /* set panel winformation */ - if (copy_from_user(&ck, buf, sizeof(ck))) - return -EFAULT; - - if (ck.enable && - (ck.red_max < ck.red_min || - ck.green_max < ck.green_min || - ck.blue_max < ck.blue_min)) - return -EINVAL; - - if (!ck.enable) { - ad->ckmax_r = 0; - ad->ckmax_g = 0; - ad->ckmax_b = 0; - ad->ckmin_r = 255; - ad->ckmin_g = 255; - ad->ckmin_b = 255; - } else { - ad->ckmax_r = ck.red_max; - ad->ckmax_g = ck.green_max; - ad->ckmax_b = ck.blue_max; - ad->ckmin_r = ck.red_min; - ad->ckmin_g = ck.green_min; - ad->ckmin_b = ck.blue_min; - } - pr_debug("set chroma key\n"); - break; - case FBIOGET_GWINFO: - if (mfbi->type == MFB_TYPE_OFF) - return -ENODEV; - /* get graphic window information */ - if (copy_to_user(buf, ad, sizeof(*ad))) - return -EFAULT; - break; - case FBIOGET_HWCINFO: - pr_debug("FBIOGET_HWCINFO:0x%08x\n", FBIOGET_HWCINFO); - break; - case FBIOPUT_MODEINFO: - pr_debug("FBIOPUT_MODEINFO:0x%08x\n", FBIOPUT_MODEINFO); - break; - case FBIOGET_DISPINFO: - pr_debug("FBIOGET_DISPINFO:0x%08x\n", FBIOGET_DISPINFO); - break; - - default: - printk(KERN_ERR "Unknown ioctl command (0x%08X)\n", cmd); - return -ENOIOCTLCMD; - } - - return 0; -} - /* turn on fb if count == 1 */ static int fsl_diu_open(struct fb_info *info, int user) @@ -1162,7 +1094,6 @@ static struct fb_ops fsl_diu_ops = { .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, - .fb_ioctl = fsl_diu_ioctl, .fb_open = fsl_diu_open, .fb_release = fsl_diu_release, }; diff --git a/include/linux/fsl-diu-fb.h b/include/linux/fsl-diu-fb.h index 781d467..234c38e 100644 --- a/include/linux/fsl-diu-fb.h +++ b/include/linux/fsl-diu-fb.h @@ -20,55 +20,8 @@ #ifndef __FSL_DIU_FB_H__ #define __FSL_DIU_FB_H__ -/* Arbitrary threshold to determine the allocation method - * See mpc8610fb_set_par(), map_video_memory(), and unmap_video_memory() - */ -#define MEM_ALLOC_THRESHOLD (1024*768*4+32) -/* Minimum value that the pixel clock can be set to in pico seconds - * This is determined by platform clock/3 where the minimum platform - * clock is 533MHz. This gives 5629 pico seconds. - */ -#define MIN_PIX_CLK 5629 -#define MAX_PIX_CLK 96096 - #include <linux/types.h> -struct mfb_alpha { - int enable; - int alpha; -}; - -struct mfb_chroma_key { - int enable; - __u8 red_max; - __u8 green_max; - __u8 blue_max; - __u8 red_min; - __u8 green_min; - __u8 blue_min; -}; - -struct aoi_display_offset { - int x_aoi_d; - int y_aoi_d; -}; - -#define MFB_SET_CHROMA_KEY _IOW('M', 1, struct mfb_chroma_key) -#define MFB_SET_BRIGHTNESS _IOW('M', 3, __u8) - -#define MFB_SET_ALPHA 0x80014d00 -#define MFB_GET_ALPHA 0x40014d00 -#define MFB_SET_AOID 0x80084d04 -#define MFB_GET_AOID 0x40084d04 -#define MFB_SET_PIXFMT 0x80014d08 -#define MFB_GET_PIXFMT 0x40014d08 - -#define FBIOGET_GWINFO 0x46E0 -#define FBIOPUT_GWINFO 0x46E1 - -#ifdef __KERNEL__ -#include <linux/spinlock.h> - /* * These are the fields of area descriptor(in DDR memory) for every plane */ @@ -165,39 +118,6 @@ struct diu { __be32 plut; } __attribute__ ((packed)); -struct diu_hw { - struct diu *diu_reg; - spinlock_t reg_lock; - - __u32 mode; /* DIU operation mode */ -}; - -struct diu_addr { - __u8 __iomem *vaddr; /* Virtual address */ - dma_addr_t paddr; /* Physical address */ - __u32 offset; -}; - -struct diu_pool { - struct diu_addr ad; - struct diu_addr gamma; - struct diu_addr pallete; - struct diu_addr cursor; -}; - -#define FSL_DIU_BASE_OFFSET 0x2C000 /* Offset of DIU */ -#define INT_LCDC 64 /* DIU interrupt number */ - -#define FSL_AOI_NUM 6 /* 5 AOIs and one dummy AOI */ - /* 1 for plane 0, 2 for plane 1&2 each */ - -/* Minimum X and Y resolutions */ -#define MIN_XRES 64 -#define MIN_YRES 64 - -/* HW cursor parameters */ -#define MAX_CURS 32 - /* Modes of operation of DIU */ #define MFB_MODE0 0 /* DIU off */ #define MFB_MODE1 1 /* All three planes output to display */ @@ -205,18 +125,4 @@ struct diu_pool { #define MFB_MODE3 3 /* All three planes written back to memory */ #define MFB_MODE4 4 /* Color bar generation */ -/* INT_STATUS/INT_MASK field descriptions */ -#define INT_VSYNC 0x01 /* Vsync interrupt */ -#define INT_VSYNC_WB 0x02 /* Vsync interrupt for write back operation */ -#define INT_UNDRUN 0x04 /* Under run exception interrupt */ -#define INT_PARERR 0x08 /* Display parameters error interrupt */ -#define INT_LS_BF_VS 0x10 /* Lines before vsync. interrupt */ - -/* Panels'operation modes */ -#define MFB_TYPE_OUTPUT 0 /* Panel output to display */ -#define MFB_TYPE_OFF 1 /* Panel off */ -#define MFB_TYPE_WB 2 /* Panel written back to memory */ -#define MFB_TYPE_TEST 3 /* Panel generate color bar */ - -#endif /* __KERNEL__ */ #endif /* __FSL_DIU_FB_H__ */ -- 1.7.3.4 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev