Hi, We have a MPC7410 based board and we are trying to port Linux on the same.
the Board Architecture/UART connection is as follows *MPC7410 ---> MPC107(PCI Bridge) ---> PLX9052(PCI->Local Bus Bridge) ---> UART* The address mapping is as follows PLX9052 @ 0xDB00_0000 UART @ 0xDB00_0100 FLASH @ 0xFF00_0000 RAM @ 0x0 We have to port Linux 2.6.24( default one with ELDK4.2). as we don't have a debugger, we are using (my_reset) function which simply resets the board. We have uboot up and running. we are downloading uImage to RAM location @0x800000 and JMP to 0x80000 Linux is executing till setup_arch() call in the start_kernel() function. We are facing some issue in page_init() call; also on setting the BAT registers.(which is done at platform_init) Anyone got any clue how to set the BAT for MPC7410 ?
_______________________________________________ Linuxppc-dev mailing list [email protected] https://lists.ozlabs.org/listinfo/linuxppc-dev
