On 08/05/2011 12:31 AM, smitha.va...@wipro.com wrote: > Hi > > I have bringup WR linux 2.6.38 on a custom mpc8247 board. Not able to > configure the ipaddress. When I boot my linux kernel I get the below > message. > Also I am using the fec 1. The fec is not getting initialized. > fs_enet.c:v1.0 (Aug 8, 2005) > BB MII Bus: Cannot register as MDIO bus > fsl-bb-mdio: probe of fsl-bb-mdio.0 failed with error -1 > BB MII Bus: Cannot register as MDIO bus > fsl-bb-mdio: probe of fsl-bb-mdio.1 failed with error -1 > I have enabled the following: > > > CONFIG_NET_ETHERNET=y > > CONFIG_MII=y > > CONFIG_FS_ENET=y > > # CONFIG_FS_ENET_HAS_SCC is not set > > CONFIG_FS_ENET_HAS_FCC=y
Can you attach your device tree? What sort of mdio do you have on your board? > *Please do not print this email unless it is absolutely necessary. * > > The information contained in this electronic message and any attachments > to this message are intended for the exclusive use of the addressee(s) > and may contain proprietary, confidential or privileged information. If > you are not the intended recipient, you should not disseminate, > distribute or copy this e-mail. Please notify the sender immediately and > destroy all copies of this message and any attachments. > > WARNING: Computer viruses can be transmitted via email. The recipient > should check this email and any attachments for the presence of viruses. > The company accepts no liability for any damage caused by any virus > transmitted by this email. > > www.wipro.com Is there any way you can turn this crud off? -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev