On 08/25/2011 02:57 AM, smitha.va...@wipro.com wrote: > Hi Scott, > > I am currently trying to bring up 2.6.39 kernel on a target based on MPC8247 > Processor, using the attched .dts file . I get the below logs while the > kernel is booting. > I see that the unflattening of the device tree and the initial loading > of the kernel and ramdisk file system is happening correctly. Can you > point me where exactly I can look for this issue. I am attaching the > .config and .dts file I am using.
Which error are you referring to? > of-flash ff800000.flash: do_map_probe() failed What kind of flash chip do you have? Does the node in the device tree accurately describe it (four interleaved 8-bit chips that only do JEDEC and not CFI)? > PPP generic driver version 2.4.2 > PPP Deflate Compression module registered > tun: Universal TUN/TAP device driver, 1.6 > tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com> > eth0: fs_enet: 00:00:00:00:00:00 > eth1: fs_enet: 00:00:00:00:00:00 These MAC addresses should have been set in the device tree. If you're using U-Boot, it should be doing the fixup. > Populating /dev using udev: /sbin/udevd: '/lib/libc.so.6' library > contains unsup > ported TLS > /sbin/udevd: '/lib/libc.so.6' library contains unsupported TLS > /sbin/udevd: can't load library 'libc.so.6' > FAIL > /sbin/udevstart: '/lib/libc.so.6' library contains unsupported TLS > /sbin/udevstart: '/lib/libc.so.6' library contains unsupported TLS > /sbin/udevstart: can't load library 'libc.so.6' > FAIL This is a problem with the root filesystem, not the kernel. -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev