Hi, For detail please look at ePAPR specification.
Say i2c interrupt number is 21 then you can try "interrupts = <21 8>;" in device tree. Thanks -Bharat > -----Original Message----- > From: smitha.va...@wipro.com [mailto:smitha.va...@wipro.com] > Sent: Tuesday, October 18, 2011 2:35 PM > To: Bhushan Bharat-R65777; Wood Scott-B07421 > Cc: linuxppc-dev@lists.ozlabs.org > Subject: RE: IRQ2 and IRQ 3 > > Yes , there is a vector numbe defined in the specifications . > > IRQ2 - 20 > IRQ3 - 21 > > But I don't know how to specify them in the .dts file . > > Regards, > Smitha > Please do not print this email unless it is absolutely necessary. > > The information contained in this electronic message and any attachments > to this message are intended for the exclusive use of the addressee(s) > and may contain proprietary, confidential or privileged information. If > you are not the intended recipient, you should not disseminate, > distribute or copy this e-mail. Please notify the sender immediately and > destroy all copies of this message and any attachments. > > WARNING: Computer viruses can be transmitted via email. The recipient > should check this email and any attachments for the presence of viruses. > The company accepts no liability for any damage caused by any virus > transmitted by this email. > > www.wipro.com _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev