>-----Original Message----- >From: Wood Scott-B07421 >Sent: Wednesday, November 09, 2011 4:58 AM >To: Li Yang-R58472 >Cc: Wood Scott-B07421; Zhao Chenhui-B35336; linuxppc-dev@lists.ozlabs.org >Subject: Re: [PATCH 2/7] powerpc/85xx: add HOTPLUG_CPU support > >On 11/08/2011 04:05 AM, Li Yang-R58472 wrote: >>> Subject: Re: [PATCH 2/7] powerpc/85xx: add HOTPLUG_CPU support >>> >>> On 11/04/2011 07:31 AM, Zhao Chenhui wrote: >>>> +static int is_corenet; >>>> +static void __cpuinit smp_85xx_setup_cpu(int cpu_nr); >>>> + >>>> +#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32) >>> >>> Why PPC32? >> >> Not sure if it is the same for e5500. E5500 support will be verified >later. > >It's better to have 64-bit silently do nothing here? > >>>> + flush_disable_L1(); >>> >>> You'll also need to take down L2 on e500mc. >> >> Right. E500mc support is beyond this patch series. We will work on it >after the e500v2 support is finalized. > >I saw some support with "is_corenet"... If we don't support e500mc, make >sure the code doesn't try to run on e500mc.
The is_corenet code is just a start of the e500mc support and is far from complete. > >This isn't an e500v2-only BSP you're putting the code into. :-) Yes, I know. But it will take quite some time to perfect the support for different type of cores. I'd like to make the effort into stages. We want to push the e500v2 support in first and add support to newer cores later so that we don't need to re-spin the patches again and again. And the upstream kernel can get the PM functionality at least for e500v2 earlier. Anyway, we need to update the title of the patch to be more specific on e500v2. > >>>> + tmp = 0; >>>> + if (cpu_has_feature(CPU_FTR_CAN_NAP)) >>>> + tmp = HID0_NAP; >>>> + else if (cpu_has_feature(CPU_FTR_CAN_DOZE)) >>>> + tmp = HID0_DOZE; >>> >>> Those FTR bits are for what we can do in idle, and can be cleared if >>> the user sets CONFIG_BDI_SWITCH. >> >> It is powersave_nap variable shows what we can do in idle. > >No, that shows what the user wants to do in idle. > >> I think it's correct to use the CPU_FTR_CAN_* macro as CPU capability. > >This is 85xx-specific code. We always can, and want to, nap here (though >the way we enter nap will be different on e500mc and up) -- even if it's >broken to use it for idle (such as on p4080, which would miss doorbells as >wake events). Ok. Will stick to Nap. > >>>> +static void __cpuinit smp_85xx_reset_core(int nr) { >>>> + __iomem u32 *vaddr, *pir_vaddr; >>>> + u32 val, cpu_mask; >>>> + >>>> + /* If CoreNet platform, use BRR as release register. */ >>>> + if (is_corenet) { >>>> + cpu_mask = 1 << nr; >>>> + vaddr = ioremap(get_immrbase() + MPC85xx_BRR_OFF, 4); >>>> + } else { >>>> + cpu_mask = 1 << (24 + nr); >>>> + vaddr = ioremap(get_immrbase() + MPC85xx_ECM_EEBPCR_OFF, 4); >>>> + } >>> >>> Please use the device tree node, not get_immrbase(). >> >> The get_immrbase() implementation uses the device tree node. > >I mean the guts node. get_immrbase() should be avoided where possible. Ok. I got your point to use offset from guts. > >Also, some people might care about latency to enter/exit deep sleep. >Searching through the device tree at this point (rather than on init) >slows that down. Actually the get_immrbase() is smarter than you thought. :) It only search the device tree on first call and returns the saved value on follow up calls. > >>>> +static int __cpuinit smp_85xx_map_bootpg(u32 page) { >>>> + __iomem u32 *bootpg_ptr; >>>> + u32 bptr; >>>> + >>>> + /* Get the BPTR */ >>>> + bootpg_ptr = ioremap(get_immrbase() + MPC85xx_BPTR_OFF, 4); >>>> + >>>> + /* Set the BPTR to the secondary boot page */ >>>> + bptr = MPC85xx_BPTR_EN | (page & MPC85xx_BPTR_BOOT_PAGE_MASK); >>>> + out_be32(bootpg_ptr, bptr); >>>> + >>>> + iounmap(bootpg_ptr); >>>> + return 0; >>>> +} >>> >>> Shouldn't the boot page already be set by U-Boot? >> >> The register should be lost after a deep sleep. Better to do it again. > >How can it be lost after a deep sleep if we're relying on it to hold our >wakeup code? In order to wake up from deep sleep, the boot page has been set to the deep sleep restoration function. We need to set it back to the bootpage from u-boot. > >It's not "better to do it again" if we're making a bad assumption about >the code and the table being in the same page. Currently we are reusing the whole boot page including the spin-table from u-boot. Are you suggesting to move just the boot page to kernel? > >>>> local_irq_save(flags); >>>> >>>> - out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr); >>>> + out_be32(&epapr->pir, hw_cpu); >>>> #ifdef CONFIG_PPC32 >>>> - out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start)); >>>> +#ifdef CONFIG_HOTPLUG_CPU >>>> + if (system_state == SYSTEM_RUNNING) { >>>> + out_be32(&epapr->addr_l, 0); >>>> + smp_85xx_map_bootpg((u32)(*cpu_rel_addr >> PAGE_SHIFT)); >>> >>> Why is this inside PPC32? >> >> Not tested on 64-bit yet. Might require a different implementation on >PPC64. > >Please make a reasonable effort to do things in a way that works on both. >It shouldn't be a big deal to test that it doesn't break booting on p5020. Will do. But in stages. > >>>> if (!ioremappable) >>>> - flush_dcache_range((ulong)bptr_vaddr, >>>> - (ulong)(bptr_vaddr + SIZE_BOOT_ENTRY)); >>>> + flush_dcache_range((ulong)epapr, >>>> + (ulong)epapr + sizeof(struct epapr_entry)); >>> >>> We don't wait for the core to come up on 64-bit? >> >> Not sure about it. But at least the normal boot up should be tested on >P5020, right? > >Well, that's a special case in that it only has one secondary. :-) > >Or we could be getting lucky with timing. It's not a new issue with this >patch, it just looks odd. We will look into it more when doing the e5500 support. - Leo _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev