>-----Original Message----- >From: Wood Scott-B07421 >Sent: Wednesday, November 09, 2011 4:40 AM >To: Li Yang-R58472 >Cc: Wood Scott-B07421; Zhao Chenhui-B35336; linuxppc-dev@lists.ozlabs.org >Subject: Re: [PATCH 5/7] fsl_pmc: update device bindings > >On 11/08/2011 04:56 AM, Li Yang-R58472 wrote: >>>> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt >>> b/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt >>>> index 07256b7..d84b4f8 100644 >>>> --- a/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt >>>> +++ b/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt >>>> @@ -9,22 +9,27 @@ Properties: >>>> >>>> "fsl,mpc8548-pmc" should be listed for any chip whose PMC is >>>> compatible. "fsl,mpc8536-pmc" should also be listed for any chip >>>> - whose PMC is compatible, and implies deep-sleep capability. >>>> + whose PMC is compatible, and implies deep-sleep capability and >>>> + wake on user defined packet(wakeup on ARP). >>> >>> Why does the PMC care? This is an ethernet controller feature, the >>> PMC is just keeping the wakeup-relevant parts of the ethernet >>> controller alive (whatever they happen to be). >>> >>> Do we have any chips that have ethernet controller support for wake >>> on user-defined packet, but a sleep mode that doesn't let it be used? >> >> I think it is more a PMC feature cause Ethernet controller on many >> SoCs have the filer feature, but only very limited SoCs can support >> using it as a wake-up source. The differences should be mostly in the >> PM controller block. > >Have you tried waking from sleep with it on those other SoCs?
We have tried and it's not working. Although the filer is an eTSEC feature, waking up on it is really a complex system wide change including eTSEC, DDR, ECM, PIC, and etc. And currently it's tied up to deep sleep feature. So I would like it to be part of the SoC integration domain i.e. PMC. > >> Also the wake on user-defined packet feature was never mentioned in the >Ethernet controller part of UM. > >AFAICT all this "feature" is, is programming the Ethernet controller to >filter out some packets that we don't want to wake us up, and then >refraining from entering magic packet mode. What PMC registers are >programmed any differently for this? > >It's in the PM part of the manual because that's where they generally >describe issues related to PM. They describe magic packet there too. > >The set of devices which are still active during sleep is a different >issue from the conditions on which a device will request a wake. > >I also don't trust our PM documentation very much. It's ambiguous just >what gets shut down in ordinary sleep mode. E.g. the mpc8544 manual talks >about "external interrupts", but in one place it looks like it means >external to the SoC: > >> In sleep mode, all clocks internal to the e500 core are turned off, >> including the timer facilities clock. All I/O interfaces in the device >> logic are also shut down. Only the clocks to the MPC8544E PIC are still >running so that an external interrupt can wake up the device. > >But the note immediately below that seems to imply they're talking about >external to the core: > >> Only external interrupts can wake the MPC8544E from sleep mode. >> Internal interrupt sources like the core interval timer or watchdog >> timer depend on an active clock for their operation and these are >disabled in sleep mode. > > > >>> Normally that shouldn't matter, but we already an unused binding for >>> this. :-) >>> >>> Please provide rationale for doing it this way. Ideally it should >>> probably use whatever http://devicetree.org/ClockBindings ends up being. >> >> I have looked into that binding. The binding was primarily defined for >the Linux clock API which is not same as what we are doing here(set wakeup >source). >> If in the future the clock API also covers wakeup related features, we >can change to use it. > >While Linux APIs can serve as an inspiration, they're not the basis of >device tree bindings. The device tree is not Linux-specific, and should >not change just because Linux changes, but rather should describe the >hardware. We want to get this right the first time. > >What we are describing here is how a device's clock is connected to the >PMC. AFAIKT, the purpose of defining the clock binding is used to describe the topology of clocks in a system. And then used for runtime control of enabling/disabling clocks or getting/changing clock frequencies. But in this PM case, we just set the wakeup capability and provide little runtime control of the clocks for on-chip devices. And it doesn't get any benefit of using this binding. If your concern is the confusion with the already existing clock binding, we can remove the clk in the name of the PM binding. If we are to use the clock binding, I think adding the CSB clock, DDR clock, core clock, and etc with this binding is more appropriate. - Leo _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev