From: Liu Shuo <b35...@freescale.com>
On both of large-page chip and small-page chip, we always should use
'elbc_fcm_ctrl->oob' to set the FPAR_LP_MS/FPAR_SP_MS bit of FPAR, don't
use a overflowed 'column' to set it.
Signed-off-by: Liu Shuo <b35...@freescale.com>
Signed-off-by: Li Yang <le...@freescale.com>
---
drivers/mtd/nand/fsl_elbc_nand.c | 18 +++++++++++-------
1 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index cc08a11..6fce7da 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -414,9 +414,17 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd,
unsigned int command,
page_addr, column);
elbc_fcm_ctrl->column = column;
- elbc_fcm_ctrl->oob = 0;
elbc_fcm_ctrl->use_mdr = 1;
+ if (column >= mtd->writesize) {
+ /* OOB area */
+ column -= mtd->writesize;
+ elbc_fcm_ctrl->oob = 1;
+ } else {
+ WARN_ON(column != 0);
+ elbc_fcm_ctrl->oob = 0;
+ }
+
fcr = (NAND_CMD_STATUS << FCR_CMD1_SHIFT) |
(NAND_CMD_SEQIN << FCR_CMD2_SHIFT) |
(NAND_CMD_PAGEPROG << FCR_CMD3_SHIFT);
@@ -441,16 +449,12 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd,
unsigned int command,
(FIR_OP_CW1 << FIR_OP6_SHIFT) |
(FIR_OP_RS << FIR_OP7_SHIFT));
- if (column >= mtd->writesize) {
+ if (elbc_fcm_ctrl->oob)
/* OOB area --> READOOB */
- column -= mtd->writesize;
fcr |= NAND_CMD_READOOB << FCR_CMD0_SHIFT;
- elbc_fcm_ctrl->oob = 1;
- } else {
- WARN_ON(column != 0);
+ else
/* First 256 bytes --> READ0 */
fcr |= NAND_CMD_READ0 << FCR_CMD0_SHIFT;
- }
}
out_be32(&lbc->fcr, fcr);
--
1.7.1
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
