Arshad, Farrukh wrote:
> Hi Tiejun,
>
> Thanks for your response. Yes, I am running two kernels one on each core in
> SAMP configuration on P1022RDK board. Given is my memory partitioning. Core 0
> is loading fine but Core 1 is not loading. CONFIG_RELOCATABLE is not set.
>
> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> Core | Base Address | Size
> | Uboot parameters
> | Kernel Configuration
> |
> -----------------------------|---------------------------|-------------------------------------|------------------------------------------------------------------|--------------------------------------------------------------------------------------------------------|
> Core 0 (MEL RT Kernel) | 0x0000,0000 | 0x1000,0000 -
> 256 (MB) |bootm_low = 0x0000,0000, bootm_size = 0x1000,0000 |
> CONFIG_PHYSICAL_START = 0x0000,0000, CONFIG_KERNEL_START = 0xC000,0000
> |
> Core 1 (LTIB Kernel) |0x1000,0000 | 0x0800,0000 -
> 128 (MB) |bootm_low = 0x1000,0000, bootm_size = 0x0800,0000 |
> CONFIG_PHYSICAL_START = 0x1000,0000, CONFIG_KERNEL_START = 0xC000,0000
> |
> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>
Please check if the following commit is already in your kernel:
------
powerpc: Fix memory limits when starting at a non-zero address
memblock_enforce_memory_limit() takes the desired maximum quantity of memory
to end up with, not an address above which memory will not be used.
Tiejun
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev
