On Die, 2012-04-17 at 20:49 +0100, o jordan wrote: > > I've been trying to get Kernel Mode Setting working on my iBook with > Ubuntu 12.04. I can only get it working by forcing PCI mode > (agpmode=-1). Setting agpmode=1 or a higher number just results in > freezing and a flashing screen.
At which point? When radeon KMS initializes, or only when X starts? > I've tried the Debian experimental kernel with the same results. I > notice with Fedora 16 they also recommend setting agpmode=-1 with a > radeon card. So I'm guessing there is no easy fix?? Probably not (AGP is flaky in general, but in particular with older UniNorth bridges), but it might be interesting to see some kernel output from booting without agpmode=-1. If you can't get it via ssh, maybe you can via netconsole or so. > With Userspace Mode Setting there is nolonger any 3D hardware > acceleration > (https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/946677 ) From the Mesa upstream POV, the drivers from the 7.11 branch could be used for this. > CONFIG_DRM_RADEON_KMS=y > CONFIG_FB_RADEON=y Not sure it's a good idea to set both of these =y: It will prevent the radeon driver from initializing at all by default if radeonfb is active. If you want CONFIG_FB_RADEON=y, I'd suggest leaving CONFIG_DRM_RADEON_KMS disabled. KMS can always be enabled at boot time with radeon.modeset=1. > CONFIG_FB_ATY128=y > CONFIG_FB_ATY=y There's no KMS for pre-Radeon ATI cards yet, so these are not directly related. > I'm not sure if CONFIG_AGP_UNINORTH should be compiled as a module or > built in. I think it would only need to be built in if the radeon driver was built in, which is not recommended. P.S. The dri-devel list at freedesktop.org might be better for this, at least in addition to linuxppc-dev. -- Earthling Michel Dänzer | http://www.amd.com Libre software enthusiast | Debian, X and DRI developer _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev