Hi Sebastian,
On Tue, May 21, 2013 at 06:41:49PM +0200, Sebastian Hesselbarth wrote:
> With DT support for mv643xx_eth, board specific init for some boards now
> is unneccessary. Remove those board files, Kconfig entries, and
> corresponding entries in kirkwood_defconfig.
>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselba...@gmail.com>
> ---
> Note: board-km_kirkwood.c is also removed, as Valentin Longchamp confirmed
> the lock-up is not caused by accessing clock gating registers but rather
> non-existent device registers. This will be addressed by dtsi separation
> for kirkwood and bobcat SoC variants.
>
> Changelog:
> v3->v4:
> - remove more boards that don't require board specific setup
>
> Cc: David Miller <da...@davemloft.net>
> Cc: Lennert Buytenhek <buyt...@wantstofly.org>
> Cc: Jason Cooper <ja...@lakedaemon.net>
> Cc: Andrew Lunn <and...@lunn.ch>
> Cc: Benjamin Herrenschmidt <b...@kernel.crashing.org>
> Cc: net...@vger.kernel.org
> Cc: linux-arm-ker...@lists.infradead.org
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: linux-ker...@vger.kernel.org
> ---
> arch/arm/configs/kirkwood_defconfig | 16 ----
> arch/arm/mach-kirkwood/Kconfig | 117
> -------------------------
> arch/arm/mach-kirkwood/Makefile | 16 ----
> arch/arm/mach-kirkwood/board-dnskw.c | 7 --
> arch/arm/mach-kirkwood/board-dockstar.c | 32 -------
> arch/arm/mach-kirkwood/board-dreamplug.c | 35 --------
> arch/arm/mach-kirkwood/board-dt.c | 38 --------
> arch/arm/mach-kirkwood/board-goflexnet.c | 34 -------
> arch/arm/mach-kirkwood/board-guruplug.c | 33 -------
> arch/arm/mach-kirkwood/board-ib62x0.c | 29 ------
> arch/arm/mach-kirkwood/board-iconnect.c | 10 ---
> arch/arm/mach-kirkwood/board-iomega_ix2_200.c | 34 -------
> arch/arm/mach-kirkwood/board-km_kirkwood.c | 44 ----------
> arch/arm/mach-kirkwood/board-lsxl.c | 16 ----
> arch/arm/mach-kirkwood/board-mplcec4.c | 14 ---
> arch/arm/mach-kirkwood/board-ns2.c | 35 --------
> arch/arm/mach-kirkwood/board-openblocks_a6.c | 26 ------
> arch/arm/mach-kirkwood/board-readynas.c | 6 --
> arch/arm/mach-kirkwood/board-ts219.c | 13 ---
> arch/arm/mach-kirkwood/board-usi_topkick.c | 29 ------
> 20 files changed, 584 deletions(-)
> delete mode 100644 arch/arm/mach-kirkwood/board-dockstar.c
> delete mode 100644 arch/arm/mach-kirkwood/board-dreamplug.c
> delete mode 100644 arch/arm/mach-kirkwood/board-goflexnet.c
> delete mode 100644 arch/arm/mach-kirkwood/board-guruplug.c
> delete mode 100644 arch/arm/mach-kirkwood/board-ib62x0.c
> delete mode 100644 arch/arm/mach-kirkwood/board-iomega_ix2_200.c
> delete mode 100644 arch/arm/mach-kirkwood/board-km_kirkwood.c
> delete mode 100644 arch/arm/mach-kirkwood/board-ns2.c
> delete mode 100644 arch/arm/mach-kirkwood/board-openblocks_a6.c
> delete mode 100644 arch/arm/mach-kirkwood/board-usi_topkick.c
>
...
> diff --git a/arch/arm/mach-kirkwood/board-dt.c
> b/arch/arm/mach-kirkwood/board-dt.c
> index 8db388a..a86b41c 100644
> --- a/arch/arm/mach-kirkwood/board-dt.c
> +++ b/arch/arm/mach-kirkwood/board-dt.c
> @@ -104,59 +104,21 @@ static void __init kirkwood_dt_init(void)
> kexec_reinit = kirkwood_enable_pcie;
> #endif
>
> - if (of_machine_is_compatible("globalscale,dreamplug"))
> - dreamplug_init();
> -
> - if (of_machine_is_compatible("globalscale,guruplug"))
> - guruplug_dt_init();
> -
> if (of_machine_is_compatible("dlink,dns-kirkwood"))
> dnskw_init();
>
> - if (of_machine_is_compatible("iom,iconnect"))
> - iconnect_init();
> -
> - if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
> - ib62x0_init();
> -
> if (of_machine_is_compatible("qnap,ts219"))
> qnap_dt_ts219_init();
>
> - if (of_machine_is_compatible("seagate,dockstar"))
> - dockstar_dt_init();
> -
> - if (of_machine_is_compatible("seagate,goflexnet"))
> - goflexnet_init();
> -
> if (of_machine_is_compatible("buffalo,lsxl"))
> lsxl_init();
>
> - if (of_machine_is_compatible("iom,ix2-200"))
> - iomega_ix2_200_init();
> -
> - if (of_machine_is_compatible("keymile,km_kirkwood"))
> - km_kirkwood_init();
> -
> - if (of_machine_is_compatible("lacie,cloudbox") ||
> - of_machine_is_compatible("lacie,inetspace_v2") ||
> - of_machine_is_compatible("lacie,netspace_lite_v2") ||
> - of_machine_is_compatible("lacie,netspace_max_v2") ||
> - of_machine_is_compatible("lacie,netspace_mini_v2") ||
> - of_machine_is_compatible("lacie,netspace_v2"))
> - ns2_init();
> -
> if (of_machine_is_compatible("mpl,cec4"))
> mplcec4_init();
>
> if (of_machine_is_compatible("netgear,readynas-duo-v2"))
> netgear_readynas_init();
>
> - if (of_machine_is_compatible("plathome,openblocks-a6"))
> - openblocks_a6_init();
> -
> - if (of_machine_is_compatible("usi,topkick"))
> - usi_topkick_init();
> -
> of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
> }
We still have:
static const char * const kirkwood_dt_board_compat[] = {
"globalscale,dreamplug",
"globalscale,guruplug",
"dlink,dns-320",
"dlink,dns-325",
"iom,iconnect",
"raidsonic,ib-nas62x0",
"qnap,ts219",
"seagate,dockstar",
"seagate,goflexnet",
"buffalo,lsxl",
"iom,ix2-200",
"keymile,km_kirkwood",
"lacie,cloudbox",
"lacie,inetspace_v2",
"lacie,netspace_lite_v2",
"lacie,netspace_max_v2",
"lacie,netspace_mini_v2",
"lacie,netspace_v2",
"mpl,cec4",
"netgear,readynas-duo-v2",
"plathome,openblocks-a6",
"usi,topkick",
"zyxel,nsa310",
NULL
};
in that file. I think it does not make sense that we need to list
boards here that can be described fully by DT. When adding such a
board in the future, you will still need to adapt board-dt.c.
Should we remove the boards that you removed above here as well and
add
"marvell,kirkwood-88f6192",
"marvell,kirkwood-88f6281",
"marvell,kirkwood-88f6282",
"marvell,kirkwood-88f6283",
"marvell,kirkwood-88f6702",
"marvell,kirkwood-98DX4122",
or even just state "marvell,kirkwood"?
- Simon
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
