Dear Sir,
We are using P1021rdb-pc board with p1021 processor.
1. compilation and build process is taking so much of time. How should I
reduce the time for linux build process?
2. In kernel configuration we are not able to select P1021rdb., When we
configured the board for p1021RDB-PC , in default kenel config file all
the below platforms are selected , We want only p1021rdb , what should we
select here?
CONFIG_PPC_CELL is not set
CONFIG_FSL_SOC_BOOKE=y
CONFIG_FSL_85XX_CACHE_SRAM=y
CONFIG_MPC8540_ADS=y
CONFIG_MPC8560_ADS=y
CONFIG_MPC85xx_CDS=y
CONFIG_MPC85xx_MDS=y
CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y
CONFIG_MPC85xx_RDB=y
# CONFIG_P1010_RDB is not set
CONFIG_P1022_DS=y
CONFIG_P1023_RDS=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
CONFIG_XES_MPC85xx=y
CONFIG_STX_GP3=y
CONFIG_TQM8540=y
CONFIG_TQM8541=y
CONFIG_TQM8548=y
CONFIG_TQM8555=y
CONFIG_TQM8560=y
CONFIG_SBC8548=y
I am attaching .config file for the reference
3. We are using p1021 processor which has 36 bit support , but we have
compiled uboot for 32 bit only.Is there any specfic use of 36 bit compilation,
?
only large amount of memory size 0f 64G, any way we are using only 512Mbyte of
DDR, 128MBYte NOR FLASH
4. Now we are using SDK 1.3.2 for p1021 procesor .Is there any specific
necessity that we should switch to sdk1.4
regarding linux drivers specially included for p1021 procesor?
5.UMCC driver is available in linux driver ? where should I get some help
regarding UMCC ?
regards
Bharathi kandimalla
P.S. - Please Note our New Corporate office Address:-
ICOMM House,
Plot No.31, Kamalapuri,
Srinagar Colony, Banjara Hills,
Hyderabad - 500073, INDIA.
Disclaimer
This email is confidential. If you are not the addressee tell the sender
immediately and destroy this email without using, sending or storing it. E-mail
transmission cannot be secure as information could be intercepted, corrupted,
lost, destroyed, delay, interception, amendment or incomplete, or contain
viruses. ICOMM TELE LTD and subsidiaries ("ICOMM") do not accept liability for
damage caused by this email and may monitor email traffic. Unless expressly
stated, any opinions are the sender's and are not approved by ICOMM and this
email is not an offer, solicitation, recommendation or agreement of any kind.
If verification is required please request a hard-copy version. ICOMM's
corporate office is ICOMM House, Plot No.31, Kamalapuri, Srinagar Colony,
Banjara Hills, Hyderabad - 500073 INDIA. Ph. No. : +91-40-2355-2222. Fax. No. :
+91-40-2355-2266.
Thank You
ICOMM<http://www.icommtele.com>
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev
