Signed-off-by: Shaveta Leekha <[email protected]>
---
.../devicetree/bindings/powerpc/fsl/maple.txt | 50 ++++++++++++++++++++
1 files changed, 50 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/maple.txt
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/maple.txt
b/Documentation/devicetree/bindings/powerpc/fsl/maple.txt
new file mode 100644
index 0000000..23b80a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/maple.txt
@@ -0,0 +1,50 @@
+* Freescale MAPLE Multi Accelerator Platform Engine Baseband 3
+ (MAPLE-B3)device nodes
+
+Supported chips:
+Example: B4860
+
+Required properties:
+
+- compatible: Should contain "fsl,maple-b3" as the value
+ This identifies Multi Accelerator Platform Engine
+ Baseband 3 block.
+
+- reg: offset and length of the register set for the device
+
+- interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this device. The
+ value of the interrupts property consists of one
interrupt
+ specifier. The format of the specifier is defined by the
+ binding document describing the node's interrupt parent.
+
+ A single IRQ that handles error conditions is specified by
+ this property. (Typically shared with port-write).
+
+Devices that have LIODNs need to specify links to the parent PAMU controller
+(the actual PAMU controller that this device is connected to) and a pointer to
+the LIODN register, if applicable.
+
+- fsl,iommu-parent
+ : <phandle>
+ This property should be present
+
+- status = "disabled"
+ In this example, status is set "disabled",
+ As Maple device wouldn't be used by PPC Linux. This
representation is required
+ for doing the PAMU programming on the Linux side.
+
+Example:
+ /* B4860 */
+
+ maple@800000 {
+ #address-cells = <0>;
+ #size-cells = <0>;
+ status = "disabled";
+ compatible = "fsl,maple-b3";
+ reg = <0x8000000 0x10000>;
+ interrupts = <16 2 1 18>;
+ fsl,iommu-parent = <&pamu1>;
+ };
--
1.7.6.GIT
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev
