On VF610 series there are no regulators used, and now whether the
CONFIG_REGULATOR mirco is enabled or not, for the VF610 audio
patch series, the board cannot be probe successfully.
And this patch will solve this issue.

Signed-off-by: Xiubo Li <li.xi...@freescale.com>
---
 sound/soc/codecs/sgtl5000.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 1f4093f..c2f6d86 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -61,6 +61,7 @@ static const struct reg_default sgtl5000_reg_defaults[] = {
        { SGTL5000_DAP_AVC_DECAY,               0x0050 },
 };
 
+#ifdef CONFIG_REGULATOR
 /* regulator supplies for sgtl5000, VDDD is an optional external supply */
 enum sgtl5000_regulator_supplies {
        VDDA,
@@ -93,6 +94,9 @@ static struct regulator_init_data ldo_init_data = {
        .num_consumer_supplies = 1,
        .consumer_supplies = &ldo_consumer[0],
 };
+#else
+#define SGTL5000_SUPPLY_NUM 0
+#endif
 
 /*
  * sgtl5000 internal ldo regulator,
@@ -112,7 +116,9 @@ struct sgtl5000_priv {
        int master;     /* i2s master or not */
        int fmt;        /* i2s data format */
        struct regulator_bulk_data supplies[SGTL5000_SUPPLY_NUM];
+#ifdef CONFIG_REGULATOR
        struct ldo_regulator *ldo;
+#endif
        struct regmap *regmap;
        struct clk *mclk;
 };
@@ -879,6 +885,7 @@ static int ldo_regulator_remove(struct snd_soc_codec *codec)
        return 0;
 }
 #else
+#ifndef CONFIG_SND_SOC_FSL_SGTL5000_VF610
 static int ldo_regulator_register(struct snd_soc_codec *codec,
                                struct regulator_init_data *init_data,
                                int voltage)
@@ -886,6 +893,7 @@ static int ldo_regulator_register(struct snd_soc_codec 
*codec,
        dev_err(codec->dev, "this setup needs regulator support in the 
kernel\n");
        return -EINVAL;
 }
+#endif
 
 static int ldo_regulator_remove(struct snd_soc_codec *codec)
 {
@@ -1137,6 +1145,7 @@ static int sgtl5000_resume(struct snd_soc_codec *codec)
 #define sgtl5000_resume  NULL
 #endif /* CONFIG_SUSPEND */
 
+#ifdef CONFIG_REGULATOR
 /*
  * sgtl5000 has 3 internal power supplies:
  * 1. VAG, normally set to vdda/2
@@ -1373,6 +1382,7 @@ err_regulator_free:
        return ret;
 
 }
+#endif
 
 static int sgtl5000_probe(struct snd_soc_codec *codec)
 {
@@ -1387,6 +1397,7 @@ static int sgtl5000_probe(struct snd_soc_codec *codec)
                return ret;
        }
 
+#ifdef CONFIG_REGULATOR
        ret = sgtl5000_enable_regulators(codec);
        if (ret)
                return ret;
@@ -1395,6 +1406,7 @@ static int sgtl5000_probe(struct snd_soc_codec *codec)
        ret = sgtl5000_set_power_regs(codec);
        if (ret)
                goto err;
+#endif
 
        /* enable small pop, introduce 400ms delay in turning off */
        snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
-- 
1.8.4


_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to