On Sat, 30 Nov 2013 23:51:24 +0100 Gerhard Sittig <g...@denx.de> wrote:
> this change implements a clock driver for the MPC512x PowerPC platform > which follows the COMMON_CLK approach and uses common clock drivers > shared with other platforms > > this driver implements the publicly announced set of clocks (those > listed in the dt-bindings header file), as well as generates additional > 'struct clk' items where the SoC hardware cannot easily get mapped to > the common primitives (shared code) of the clock API, or requires > "intermediate clock nodes" to represent clocks that have both gates and > dividers > > the previous PPC_CLOCK implementation is kept in place and remains > active for the moment, the newly introduced CCF clock driver will > receive additional support for backwards compatibility in a subsequent > patch before it gets enabled and will replace the PPC_CLOCK approach > > some of the clock items get pre-enabled in the clock driver to not have > them automatically disabled by the underlying clock subsystem because of > their being unused -- this approach is desirable because > - some of the clocks are useful to have for diagnostics and information > despite their not getting claimed by any drivers (CPU, internal and > external RAM, internal busses, boot media) > - some of the clocks aren't claimed by their peripheral drivers yet, > either because of missing driver support or because device tree specs > aren't available yet (but the workarounds will get removed as the > drivers get adjusted and the device tree provides the clock specs) > > clkdev registration provides "alias names" for few clock items > - to not break those peripheral drivers which encode their component > index into the name that is used for clock lookup (UART, SPI, USB) > - to not break those drivers which use names for the clock lookup which > were encoded in the previous PPC_CLOCK implementation (NFC, VIU, CAN) > this workaround will get removed as these drivers get adjusted after > device tree based clock lookup has become available > > the COMMON_CLK implementation copes with device trees which lack an > oscillator node (backwards compat), the REF clock is then derived from > the IPS bus frequency and multiplier values fetched from hardware > > Cc: Mike Turquette <mturque...@linaro.org> > Cc: Anatolij Gustschin <ag...@denx.de> > Cc: linux-arm-ker...@lists.infradead.org > Cc: linuxppc-dev@lists.ozlabs.org > Signed-off-by: Gerhard Sittig <g...@denx.de> > --- > arch/powerpc/platforms/512x/Makefile | 4 +- > arch/powerpc/platforms/512x/clock-commonclk.c | 798 > +++++++++++++++++++++++++ > include/linux/clk-provider.h | 16 + > 3 files changed, 817 insertions(+), 1 deletion(-) > create mode 100644 arch/powerpc/platforms/512x/clock-commonclk.c applied to next. Thanks! Anatolij _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev