Register with kernel poweroff handler instead of setting pm_power_off
directly. Register with a low priority value of 64 to reflect that
the original code only sets pm_power_off if it was not already set.

Note that this patch fixes a problem on driver unload as side effect:
The old code did not restore or clean up pm_power_off on remove,
meaning the pointer was left in an undefined state.

Cc: Lee Jones <lee.jo...@linaro.org>
Cc: Samuel Ortiz <sa...@linux.intel.com>
Signed-off-by: Guenter Roeck <li...@roeck-us.net>
---
 drivers/mfd/max8907.c       | 24 ++++++++++++++++++------
 include/linux/mfd/max8907.h |  2 ++
 2 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/max8907.c b/drivers/mfd/max8907.c
index 232749c..b8cddc1 100644
--- a/drivers/mfd/max8907.c
+++ b/drivers/mfd/max8907.c
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/pm.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
@@ -177,11 +178,16 @@ static const struct regmap_irq_chip max8907_rtc_irq_chip 
= {
        .num_irqs = ARRAY_SIZE(max8907_rtc_irqs),
 };
 
-static struct max8907 *max8907_pm_off;
-static void max8907_power_off(void)
+static int max8907_power_off(struct notifier_block *this, unsigned long 
unused1,
+                            void *unused2)
 {
-       regmap_update_bits(max8907_pm_off->regmap_gen, MAX8907_REG_RESET_CNFG,
+       struct max8907 *max8907 = container_of(this, struct max8907,
+                                              poweroff_nb);
+
+       regmap_update_bits(max8907->regmap_gen, MAX8907_REG_RESET_CNFG,
                        MAX8907_MASK_POWER_OFF, MAX8907_MASK_POWER_OFF);
+
+       return NOTIFY_DONE;
 }
 
 static int max8907_i2c_probe(struct i2c_client *i2c,
@@ -267,9 +273,13 @@ static int max8907_i2c_probe(struct i2c_client *i2c,
                goto err_add_devices;
        }
 
-       if (pm_off && !pm_power_off) {
-               max8907_pm_off = max8907;
-               pm_power_off = max8907_power_off;
+       if (pm_off) {
+               max8907->poweroff_nb.notifier_call = max8907_power_off;
+               max8907->poweroff_nb.priority = 64;
+               ret = register_poweroff_handler(&max8907->poweroff_nb);
+               if (ret)
+                       dev_err(&i2c->dev,
+                               "Failed to register poweroff handler");
        }
 
        return 0;
@@ -293,6 +303,8 @@ static int max8907_i2c_remove(struct i2c_client *i2c)
 {
        struct max8907 *max8907 = i2c_get_clientdata(i2c);
 
+       unregister_poweroff_handler(&max8907->poweroff_nb);
+
        mfd_remove_devices(max8907->dev);
 
        regmap_del_irq_chip(max8907->i2c_gen->irq, max8907->irqc_rtc);
diff --git a/include/linux/mfd/max8907.h b/include/linux/mfd/max8907.h
index b06f7a6..016428e 100644
--- a/include/linux/mfd/max8907.h
+++ b/include/linux/mfd/max8907.h
@@ -13,6 +13,7 @@
 #define __LINUX_MFD_MAX8907_H
 
 #include <linux/mutex.h>
+#include <linux/notifier.h>
 #include <linux/pm.h>
 
 #define MAX8907_GEN_I2C_ADDR           (0x78 >> 1)
@@ -247,6 +248,7 @@ struct max8907 {
        struct regmap_irq_chip_data     *irqc_chg;
        struct regmap_irq_chip_data     *irqc_on_off;
        struct regmap_irq_chip_data     *irqc_rtc;
+       struct notifier_block           poweroff_nb;
 };
 
 #endif
-- 
1.9.1

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to