Load the PowerNV platform pci controller ops into pci controllers
after all the operations are loaded into the platform ops struct, not
before.
Fixes: c88c2a188905cb3077c3c38dc498e7e9f8eebeee
Reported-by: Gavin Shan <gws...@linux.vnet.ibm.com>
Signed-off-by: Daniel Axtens <d...@axtens.net>
---
arch/powerpc/platforms/powernv/pci-ioda.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c
b/arch/powerpc/platforms/powernv/pci-ioda.c
index 920c252..f8bc950 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -2693,7 +2693,6 @@ static void __init pnv_pci_init_ioda_phb(struct
device_node *np,
hose->last_busno = 0xff;
}
hose->private_data = phb;
- hose->controller_ops = pnv_pci_controller_ops;
phb->hub_id = hub_id;
phb->opal_id = phb_id;
phb->type = ioda_type;
@@ -2812,6 +2811,7 @@ static void __init pnv_pci_init_ioda_phb(struct
device_node *np,
pnv_pci_controller_ops.enable_device_hook = pnv_pci_enable_device_hook;
pnv_pci_controller_ops.window_alignment = pnv_pci_window_alignment;
pnv_pci_controller_ops.reset_secondary_bus =
pnv_pci_reset_secondary_bus;
+ hose->controller_ops = pnv_pci_controller_ops;
#ifdef CONFIG_PCI_IOV
ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov_resources;
--
2.1.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
