Add support for basic ethtool operations.
Signed-off-by: Madalin Bucur <madalin.bu...@freescale.com>
---
drivers/net/ethernet/freescale/dpaa/Makefile | 2 +-
.../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 2 +
.../net/ethernet/freescale/dpaa/dpaa_eth_common.h | 3 +
drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 230 +++++++++++++++++++++
4 files changed, 236 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile
b/drivers/net/ethernet/freescale/dpaa/Makefile
index cf126dd..e137146 100644
--- a/drivers/net/ethernet/freescale/dpaa/Makefile
+++ b/drivers/net/ethernet/freescale/dpaa/Makefile
@@ -10,4 +10,4 @@ ccflags-y += -I$(FMAN)/flib
obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o
-fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o
+fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o dpaa_ethtool.o
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
index 1258683..ca6831a 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c
@@ -81,6 +81,8 @@ int dpa_netdev_init(struct net_device *net_dev,
memcpy(net_dev->perm_addr, mac_addr, net_dev->addr_len);
memcpy(net_dev->dev_addr, mac_addr, net_dev->addr_len);
+ net_dev->ethtool_ops = &dpa_ethtool_ops;
+
net_dev->needed_headroom = priv->tx_headroom;
net_dev->watchdog_timeo = msecs_to_jiffies(tx_timeout);
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
index 4581bfc..a940561 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h
@@ -58,6 +58,9 @@
/* used in napi related functions */
extern u16 qman_portal_max;
+/* from dpa_ethtool.c */
+extern const struct ethtool_ops dpa_ethtool_ops;
+
int dpa_netdev_init(struct net_device *net_dev,
const u8 *mac_addr,
u16 tx_timeout);
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
new file mode 100644
index 0000000..069fcf1
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
@@ -0,0 +1,230 @@
+/* Copyright 2008-2015 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/string.h>
+
+#include "dpaa_eth.h"
+#include "mac.h"
+#include "dpaa_eth_common.h"
+
+static int dpa_get_settings(struct net_device *net_dev,
+ struct ethtool_cmd *et_cmd)
+{
+ int err;
+ struct dpa_priv_s *priv;
+
+ priv = netdev_priv(net_dev);
+
+ if (!priv->mac_dev->phy_dev) {
+ netdev_dbg(net_dev, "phy device not initialized\n");
+ return 0;
+ }
+
+ err = phy_ethtool_gset(priv->mac_dev->phy_dev, et_cmd);
+
+ return err;
+}
+
+static int dpa_set_settings(struct net_device *net_dev,
+ struct ethtool_cmd *et_cmd)
+{
+ int err;
+ struct dpa_priv_s *priv;
+
+ priv = netdev_priv(net_dev);
+
+ if (!priv->mac_dev->phy_dev) {
+ netdev_err(net_dev, "phy device not initialized\n");
+ return -ENODEV;
+ }
+
+ err = phy_ethtool_sset(priv->mac_dev->phy_dev, et_cmd);
+ if (err < 0)
+ netdev_err(net_dev, "phy_ethtool_sset() = %d\n", err);
+
+ return err;
+}
+
+static void dpa_get_drvinfo(struct net_device *net_dev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ int len;
+
+ strlcpy(drvinfo->driver, KBUILD_MODNAME,
+ sizeof(drvinfo->driver));
+ len = snprintf(drvinfo->version, sizeof(drvinfo->version),
+ "%X", 0);
+ len = snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
+ "%X", 0);
+
+ if (len >= sizeof(drvinfo->fw_version)) {
+ /* Truncated output */
+ netdev_notice(net_dev, "snprintf() = %d\n", len);
+ }
+ strlcpy(drvinfo->bus_info, dev_name(net_dev->dev.parent->parent),
+ sizeof(drvinfo->bus_info));
+}
+
+static u32 dpa_get_msglevel(struct net_device *net_dev)
+{
+ return ((struct dpa_priv_s *)netdev_priv(net_dev))->msg_enable;
+}
+
+static void dpa_set_msglevel(struct net_device *net_dev,
+ u32 msg_enable)
+{
+ ((struct dpa_priv_s *)netdev_priv(net_dev))->msg_enable = msg_enable;
+}
+
+static int dpa_nway_reset(struct net_device *net_dev)
+{
+ int err;
+ struct dpa_priv_s *priv;
+
+ priv = netdev_priv(net_dev);
+
+ if (!priv->mac_dev->phy_dev) {
+ netdev_err(net_dev, "phy device not initialized\n");
+ return -ENODEV;
+ }
+
+ err = 0;
+ if (priv->mac_dev->phy_dev->autoneg) {
+ err = phy_start_aneg(priv->mac_dev->phy_dev);
+ if (err < 0)
+ netdev_err(net_dev, "phy_start_aneg() = %d\n",
+ err);
+ }
+
+ return err;
+}
+
+static void dpa_get_pauseparam(struct net_device *net_dev,
+ struct ethtool_pauseparam *epause)
+{
+ struct dpa_priv_s *priv;
+ struct mac_device *mac_dev;
+ struct phy_device *phy_dev;
+
+ priv = netdev_priv(net_dev);
+ mac_dev = priv->mac_dev;
+
+ phy_dev = mac_dev->phy_dev;
+ if (!phy_dev) {
+ netdev_err(net_dev, "phy device not initialized\n");
+ return;
+ }
+
+ epause->autoneg = mac_dev->autoneg_pause;
+ epause->rx_pause = mac_dev->rx_pause_active;
+ epause->tx_pause = mac_dev->tx_pause_active;
+}
+
+static int dpa_set_pauseparam(struct net_device *net_dev,
+ struct ethtool_pauseparam *epause)
+{
+ struct dpa_priv_s *priv;
+ struct mac_device *mac_dev;
+ struct phy_device *phy_dev;
+ int err;
+ u32 newadv, oldadv;
+ bool rx_pause, tx_pause;
+
+ priv = netdev_priv(net_dev);
+ mac_dev = priv->mac_dev;
+
+ phy_dev = mac_dev->phy_dev;
+ if (!phy_dev) {
+ netdev_err(net_dev, "phy device not initialized\n");
+ return -ENODEV;
+ }
+
+ if (!(phy_dev->supported & SUPPORTED_Pause) ||
+ (!(phy_dev->supported & SUPPORTED_Asym_Pause) &&
+ (epause->rx_pause != epause->tx_pause)))
+ return -EINVAL;
+
+ /* The MAC should know how to handle PAUSE frame autonegotiation before
+ * adjust_link is triggered by a forced renegotiation of sym/asym PAUSE
+ * settings.
+ */
+ mac_dev->autoneg_pause = !!epause->autoneg;
+ mac_dev->rx_pause_req = !!epause->rx_pause;
+ mac_dev->tx_pause_req = !!epause->tx_pause;
+
+ /* Determine the sym/asym advertised PAUSE capabilities from the desired
+ * rx/tx pause settings.
+ */
+ newadv = 0;
+ if (epause->rx_pause)
+ newadv = ADVERTISED_Pause | ADVERTISED_Asym_Pause;
+ if (epause->tx_pause)
+ newadv |= ADVERTISED_Asym_Pause;
+
+ oldadv = phy_dev->advertising &
+ (ADVERTISED_Pause | ADVERTISED_Asym_Pause);
+
+ /* If there are differences between the old and the new advertised
+ * values, restart PHY autonegotiation and advertise the new values.
+ */
+ if (oldadv != newadv) {
+ phy_dev->advertising &= ~(ADVERTISED_Pause
+ | ADVERTISED_Asym_Pause);
+ phy_dev->advertising |= newadv;
+ if (phy_dev->autoneg) {
+ err = phy_start_aneg(phy_dev);
+ if (err < 0)
+ netdev_err(net_dev, "phy_start_aneg() = %d\n",
+ err);
+ }
+ }
+
+ get_pause_cfg(mac_dev, &rx_pause, &tx_pause);
+ err = set_mac_active_pause(mac_dev, rx_pause, tx_pause);
+ if (err < 0)
+ netdev_err(net_dev, "set_mac_active_pause() = %d\n", err);
+
+ return err;
+}
+
+const struct ethtool_ops dpa_ethtool_ops = {
+ .get_settings = dpa_get_settings,
+ .set_settings = dpa_set_settings,
+ .get_drvinfo = dpa_get_drvinfo,
+ .get_msglevel = dpa_get_msglevel,
+ .set_msglevel = dpa_set_msglevel,
+ .nway_reset = dpa_nway_reset,
+ .get_pauseparam = dpa_get_pauseparam,
+ .set_pauseparam = dpa_set_pauseparam,
+ .get_link = ethtool_op_get_link,
+};
--
1.7.11.7
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
