Good question. How long before lockup? The only core that should be licensed is the ethernet, and I know it was sysgened on a system with a license. This is the Xilinx reference design for the ml403 board.
On 8/24/06, Peter Ryser <peter.ryser at xilinx.com> wrote: > > Wade, > > are you sure that you did not build your hardware with evaluation cores of > the licenses? If you are using the evaluation licenses the hardware (FPGA > design) will stop working after a certain amount of time and you will see a > lock-up. > > - Peter > > > Wade Maxfield wrote: > > > I've got the LSP, and have booted it on the ML40X. > > In my opinion it is currently unstable, but that is my opinion. I've > not been able to keep it powered up for 24 hours without it locking up on > the RS232 serial terminal. Also, running updatedb over nfs causes it to > abort with a kernel panic, although that might be an interraction with the > nfs server. (Although even if the nfs server dies (which it did not), I > don't expect a kernel panic). > > I have had it run over 6 hours without issue, so I expect subtle memory > leaks, not serious problems. > > > > On 8/24/06, Claus Gindhart < claus.gindhart at kontron.com> wrote: > > > > Frank, > > > > due to my understanding of the GPL (and i have already invested some > > time > > in understanding the various flavours of open source licences), you > > should > > contact Montavista, and ask them for the sources. > > > > This board adaption is derivative work of the GPL Kernel, so the result > > of > > this work also falls under the GPL, and has to be made freely available > > under the terms of the GPL. > > > > -- > > Mit freundlichen Gruessen / Best regards > > > > Claus Gindhart > > SW R&D > > Kontron Modular Computers > > phone :++49 (0)8341-803-374 > > mailto:claus.gindhart at kontron-modular.com > > http://www.kontron.com > > > > -----BEGIN GEEK CODE BLOCK----- > > Version: 3.1 > > GU d- s++:>++:+ a+ C++$ !U !P L++>$ E-- W+(-) N- o? > > K? w !O !M V !PS PE- Y+ PGP+ t 5? X R* tv- b+ DI+++ > > D-- G e++> h--- !r x+++ > > ------END GEEK CODE BLOCK------ > > > > > > -----Original Message----- > > From: linuxppc-embedded-bounces+claus.gindhart=kontron.com at ozlabs.org > > [mailto: linuxppc-embedded-bounces+claus.gindhart=kontron.com at ozlabs.org > > ] > > On Behalf Of Frank D Lombardo > > Sent: Donnerstag, 24. August 2006 15:59 > > To: linuxppc-embedded at ozlabs.org > > Subject: MontaVista 2.6 Kernel support for Xilinx ML40x > > > > > > I noticed that MontaVista now has their Pro 4.0 version (2.6 Kernel) > > available for the Xilinx ML40x series of boards. I would assume that > > means driver support for at least most of the hardware on the boards. > > Is this code that should be freely available? How would one get a copy > > of these drivers? I am interested in drivers for the ML403. > > > > Thanks, > > Frank > > _______________________________________________ > > Linuxppc-embedded mailing list > > Linuxppc-embedded at ozlabs.org > > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > _______________________________________________ > > Linuxppc-embedded mailing list > > Linuxppc-embedded at ozlabs.org > > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > > > ------------------------------ > > _______________________________________________ Linuxppc-embedded mailing > list Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060824/d020126a/attachment.htm