I've been trying to get a WRS 8265 to do a warm reboot, and found some
things that I am wondering about.
Firstly, is anyone having success on having "reboot" restart the machine
on a similar platform?
Secondly, the default BOOTROM_RESTART_ADDR is 0x40000104 (sbc82xx.h) and I
was wondering if this matches any platforms out there. On this board, the
place where U-Boot lives is 0xFFF00104 -- and I've verified this by typing
"g fff00104" at the U-Boot prompt which causes U-Boot to simply restart.
I've changed the value in sbc82xx.h and now at the reboot, instead of a
register dump, it simply hangs. Looking at m8260_gorom (in kernel/head.S)
it clears the MSR_EE (ext int. enable) bit in the MSR before jumping --
but I was wondering if there are other bits in MSR that need to be
cleared; e.g. instruction relocation enable and data relocation enable
(MSR_IR and MSR_DR). The register bits are on p76 of MPCFPE32B.pdf from
Freescale.
I guess if somebody even said "it works for me" then I'd have a better
feeling thinking that what is done to the MSR currently is sufficient.
Paul.
__________________________________
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/
