I should have asked what version of U-Boot you were using. I've had
U-Boot 1.1.1 on this thing from the beginning, but I've heard that some
people are sticking with 1.0 on production stuff.
I've found that I can't use the watchdog timer for a reboot, since it is
"write once" (SYCPR) and I'm guessing U-Boot writes to it at boot.
As a different twist, I tried doing a reset like the m8xx does, as shown
below, but that just caused a hang as well, so I'm wondering if the
problem is more low level (board isn't set up properly, etc.)
Paul.
/*
*This is a tweaked version of the m8xx_restart.
*/
static void
sbc82xx_restart(char *cmd)
{
__volatile__ unsigned char dummy;
unsigned long msr;
volatile car_cpm2_t *cc = &cpm2_immr->im_clkrst;
msr = mfmsr();
mtmsr(msr & ~MSR_EE);
__asm__ __volatile__("": : :"memory");
/* Checkstop reset enable -- Sec. 5.3 of MPC8260UM.pdf */
cc->car_rmr = 0x80000000;
msr = mfmsr();
mtmsr(msr & ~MSR_ME);
dummy = cc->res[0];
BUG();
}
--- Eugene Surovegin <ebs at ebshome.net> wrote:
> On Tue, Apr 12, 2005 at 11:14:35AM -0700, Paul Gortmaker wrote:
> > I've been trying to get a WRS 8265 to do a warm reboot, and found some
> > things that I am wondering about.
> >
> > Firstly, is anyone having success on having "reboot" restart the
> machine
> > on a similar platform?
> >
> > Secondly, the default BOOTROM_RESTART_ADDR is 0x40000104 (sbc82xx.h)
> and I
> > was wondering if this matches any platforms out there. On this board,
> the
> > place where U-Boot lives is 0xFFF00104 -- and I've verified this by
> typing
> > "g fff00104" at the U-Boot prompt which causes U-Boot to simply
> restart.
> >
> > I've changed the value in sbc82xx.h and now at the reboot, instead of
> a
> > register dump, it simply hangs. Looking at m8260_gorom (in
> kernel/head.S)
> > it clears the MSR_EE (ext int. enable) bit in the MSR before jumping
> --
> > but I was wondering if there are other bits in MSR that need to be
> > cleared; e.g. instruction relocation enable and data relocation enable
> > (MSR_IR and MSR_DR). The register bits are on p76 of MPCFPE32B.pdf
> from
> > Freescale.
> >
> > I guess if somebody even said "it works for me" then I'd have a better
> > feeling thinking that what is done to the MSR currently is sufficient.
>
> I don't have any problems using reboot() on 8248 based board.
> Kernel.org-based 2.4.29 tree.
>
> I have U-Boot at 0xfe00'0000, and I use 0xfe00'0104 as a second
> parameter for m8260_gorom. Also make sure that first parameter is also
> correct:
>
> m8260_gorom(__pa(__res), 0xfe000104);
>
> --
> Eugene
>
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
