Paula, please verify that you are not running into the problem described in Xilinx Answer Record 22179 (http://www.xilinx.com/xlnx/xil_ans_display.jsp?iLanguageID=1&iCountryID=1&getPagePath=22179).
- Peter Paula Saame?o wrote: > Hello, > > I have 3 Xilinx ML403 boards. I have implemented a 2.4 kernel with a > basic configuration, with network support, systemACE, IIC... and it > works perfectly in one of them. > > However, when I put the ACE card, without making any change, in other > ML403 board, it does not work. The .ace file is loaded ok but then the > network leds (6 leds) start blinking and nothing else happens. > > I have tried with two ML403 different boards, and I have no idea of > where the problem is. They should work in the same way, don't they? > > Any help would be great. > > Also, I am trying to load a 2.6 kernel, but I am still on the way. I > will let you know if I get it working. > > Thanks a lot! > Paula > >------------------------------------------------------------------------ > >_______________________________________________ >Linuxppc-embedded mailing list >Linuxppc-embedded at ozlabs.org >https://ozlabs.org/mailman/listinfo/linuxppc-embedded >