Hi, Peter, I have already checked that record, and even fixing that bug and adding the C_APU_CONTROL parameter, it still does not work in any board but one.
Anyone has suffered the same issue or have any idea of why it is happening?? Thanks a lot! Paula On 1/10/06, Peter Ryser <peter.ryser at xilinx.com> wrote: > > Paula, > > please verify that you are not running into the problem described in > Xilinx Answer Record 22179 > ( > http://www.xilinx.com/xlnx/xil_ans_display.jsp?iLanguageID=1&iCountryID=1&getPagePath=22179 > ). > > - Peter > > > Paula Saame?o wrote: > > > Hello, > > > > I have 3 Xilinx ML403 boards. I have implemented a 2.4 kernel with a > > basic configuration, with network support, systemACE, IIC... and it > > works perfectly in one of them. > > > > However, when I put the ACE card, without making any change, in other > > ML403 board, it does not work. The .ace file is loaded ok but then the > > network leds (6 leds) start blinking and nothing else happens. > > > > I have tried with two ML403 different boards, and I have no idea of > > where the problem is. They should work in the same way, don't they? > > > > Any help would be great. > > > > Also, I am trying to load a 2.6 kernel, but I am still on the way. I > > will let you know if I get it working. > > > > Thanks a lot! > > Paula > > > >------------------------------------------------------------------------ > > > >_______________________________________________ > >Linuxppc-embedded mailing list > >Linuxppc-embedded at ozlabs.org > >https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060111/b96726d6/attachment.htm