Hi, Thank you very much for your answers. But I have both console and null in /dev.
-rw-rw-rw- 1 mojtaba mojtaba 0 2007-12-26 15:50 console -rw-rw-rw- 1 mojtaba mojtaba 0 2007-12-26 15:50 null They have been created by buildroot. Do I need to create them manually? Actually the size of both of them is 0 and both are empty files. Is that a problem? Thank you in advance and best regards, Mojtaba -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jean-Samuel Chenard Sent: Thursday, January 03, 2008 4:33 AM To: linuxppc-embedded@ozlabs.org; [EMAIL PROTECTED] Subject: RE: File system problem > Date: Wed, 2 Jan 2008 19:50:13 +0100 > From: "mojtaba" > I am trying to boot a root file system build by buildroot. But I got this > error" init has generated signal 11 but has no handler for it". > > My kernel version is 2.6.24-rc3 > My target system is PPC 405 (XILINX VIRTEX II pro) I am using the 26-12-2007 > snapshot of buildroot. [ ... ] > Warning: unable to open an initial console. > init has generated signal 11 but has no handler for it Kernel panic - not Hi Mojtaba, I got a similar error on my ML-310 when I tried a new root filesystem. As far as I recall, I needed to make sure that two entries existed in /dev, namely: crw------- 1 root root 5, 1 Jan 1 05:18 console crw-rw---- 1 root root 1, 3 Dec 10 2007 null I think that you are missing /dev/console and then init cannot run since it has nowhere to put its standard output. You can make those by mounting your CF card on your development host and (as root) make the nodes: # mknod -m 660 /dev/console c 5 1 # mknod -m 660 /dev/null c 1 3 In my case, I use the UartLite (ttyUL0) serial port driver, but I'm pretty sure this is going to fix the problem you are observing. Regards, Jean-Samuel -- Ph.D. candidate Integrated Microsystems Laboratory McGill University, Montréal, QC, CANADA Web Page: http://chaos.ece.mcgill.ca _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded