Add the following to the end of your dts file and see what happens: chosen { linux,stdout-path = &serial0; };
On Fri, Aug 22, 2008 at 1:57 PM, Laxmikant Rashinkar <[EMAIL PROTECTED]> wrote: > Hi, > > my .dts file is called mpc834x_mds.dts. (My processor is MPC8347) > Here are its contents. > > /* > * MPC8349E MDS Device Tree Source > * > * Copyright 2005, 2006 Freescale Semiconductor Inc. > * > * This program is free software; you can redistribute it and/or modify it > * under the terms of the GNU General Public License as published by the > * Free Software Foundation; either version 2 of the License, or (at your > * option) any later version. > */ > > /dts-v1/; > > / { > model = "MPC8349EMDS"; > compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS"; > #address-cells = <1>; > #size-cells = <1>; > > aliases { > ethernet0 = &enet0; > ethernet1 = &enet1; > serial0 = &serial0; > serial1 = &serial1; > pci0 = &pci0; > pci1 = &pci1; > }; > > cpus { > #address-cells = <1>; > #size-cells = <0>; > > PowerPC,[EMAIL PROTECTED] { > device_type = "cpu"; > reg = <0x0>; > d-cache-line-size = <32>; > i-cache-line-size = <32>; > d-cache-size = <32768>; > i-cache-size = <32768>; > timebase-frequency = <0>; // from bootloader > bus-frequency = <0>; // from bootloader > clock-frequency = <0>; // from bootloader > }; > }; > > memory { > device_type = "memory"; > reg = <0x00000000 0x10000000>; // 256MB at 0 > }; > > [EMAIL PROTECTED] { > device_type = "board-control"; > reg = <0xe2400000 0x8000>; > }; > > [EMAIL PROTECTED] { > #address-cells = <1>; > #size-cells = <1>; > device_type = "soc"; > compatible = "simple-bus"; > ranges = <0x0 0xe0000000 0x00100000>; > reg = <0xe0000000 0x00000200>; > bus-frequency = <0>; > > [EMAIL PROTECTED] { > device_type = "watchdog"; > compatible = "mpc83xx_wdt"; > reg = <0x200 0x100>; > }; > > [EMAIL PROTECTED] { > #address-cells = <1>; > #size-cells = <0>; > cell-index = <0>; > compatible = "fsl-i2c"; > reg = <0x3000 0x100>; > interrupts = <14 0x8>; > interrupt-parent = <&ipic>; > dfsrr; > > [EMAIL PROTECTED] { > compatible = "dallas,ds1374"; > reg = <0x68>; > }; > }; > > [EMAIL PROTECTED] { > #address-cells = <1>; > #size-cells = <0>; > cell-index = <1>; > compatible = "fsl-i2c"; > reg = <0x3100 0x100>; > interrupts = <15 0x8>; > interrupt-parent = <&ipic>; > dfsrr; > }; > > [EMAIL PROTECTED] { > cell-index = <0>; > compatible = "fsl,spi"; > reg = <0x7000 0x1000>; > interrupts = <16 0x8>; > interrupt-parent = <&ipic>; > mode = "cpu"; > }; > > [EMAIL PROTECTED] { > #address-cells = <1>; > #size-cells = <1>; > compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; > reg = <0x82a8 4>; > ranges = <0 0x8100 0x1a8>; > interrupt-parent = <&ipic>; > interrupts = <71 8>; > cell-index = <0>; > [EMAIL PROTECTED] { > compatible = "fsl,mpc8349-dma-channel", > "fsl,elo-dma-channel"; > reg = <0 0x80>; > interrupt-parent = <&ipic>; > interrupts = <71 8>; > }; > [EMAIL PROTECTED] { > compatible = "fsl,mpc8349-dma-channel", > "fsl,elo-dma-channel"; > reg = <0x80 0x80>; > interrupt-parent = <&ipic>; > interrupts = <71 8>; > }; > [EMAIL PROTECTED] { > compatible = "fsl,mpc8349-dma-channel", > "fsl,elo-dma-channel"; > reg = <0x100 0x80>; > interrupt-parent = <&ipic>; > interrupts = <71 8>; > }; > [EMAIL PROTECTED] { > compatible = "fsl,mpc8349-dma-channel", > "fsl,elo-dma-channel"; > reg = <0x180 0x28>; > interrupt-parent = <&ipic>; > interrupts = <71 8>; > }; > }; > > /* phy type (ULPI or SERIAL) are only types supported for > MPH */ > /* port = 0 or 1 */ > [EMAIL PROTECTED] { > compatible = "fsl-usb2-mph"; > reg = <0x22000 0x1000>; > #address-cells = <1>; > #size-cells = <0>; > interrupt-parent = <&ipic>; > interrupts = <39 0x8>; > phy_type = "ulpi"; > port1; > }; > /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ > [EMAIL PROTECTED] { > compatible = "fsl-usb2-dr"; > reg = <0x23000 0x1000>; > #address-cells = <1>; > #size-cells = <0>; > interrupt-parent = <&ipic>; > interrupts = <38 0x8>; > dr_mode = "otg"; > phy_type = "ulpi"; > }; > > [EMAIL PROTECTED] { > #address-cells = <1>; > #size-cells = <0>; > compatible = "fsl,gianfar-mdio"; > reg = <0x24520 0x20>; > > phy0: [EMAIL PROTECTED] { > interrupt-parent = <&ipic>; > interrupts = <17 0x8>; > reg = <0x0>; > device_type = "ethernet-phy"; > }; > phy1: [EMAIL PROTECTED] { > interrupt-parent = <&ipic>; > interrupts = <18 0x8>; > reg = <0x1>; > device_type = "ethernet-phy"; > }; > }; > > enet0: [EMAIL PROTECTED] { > cell-index = <0>; > device_type = "network"; > model = "TSEC"; > compatible = "gianfar"; > reg = <0x24000 0x1000>; > local-mac-address = [ 00 00 00 00 00 00 ]; > interrupts = <32 0x8 33 0x8 34 0x8>; > interrupt-parent = <&ipic>; > phy-handle = <&phy0>; > linux,network-index = <0>; > }; > > enet1: [EMAIL PROTECTED] { > cell-index = <1>; > device_type = "network"; > model = "TSEC"; > compatible = "gianfar"; > reg = <0x25000 0x1000>; > local-mac-address = [ 00 00 00 00 00 00 ]; > interrupts = <35 0x8 36 0x8 37 0x8>; > interrupt-parent = <&ipic>; > phy-handle = <&phy1>; > linux,network-index = <1>; > }; > > serial0: [EMAIL PROTECTED] { > cell-index = <0>; > device_type = "serial"; > compatible = "ns16550"; > reg = <0x4500 0x100>; > clock-frequency = <0>; > interrupts = <9 0x8>; > interrupt-parent = <&ipic>; > }; > > serial1: [EMAIL PROTECTED] { > cell-index = <1>; > device_type = "serial"; > compatible = "ns16550"; > reg = <0x4600 0x100>; > clock-frequency = <0>; > interrupts = <10 0x8>; > interrupt-parent = <&ipic>; > }; > > [EMAIL PROTECTED] { > compatible = "fsl,sec2.0"; > reg = <0x30000 0x10000>; > interrupts = <11 0x8>; > interrupt-parent = <&ipic>; > fsl,num-channels = <4>; > fsl,channel-fifo-len = <24>; > fsl,exec-units-mask = <0x7e>; > fsl,descriptor-types-mask = <0x01010ebf>; > }; > > /* IPIC > * interrupts cell = <intr #, sense> > * sense values match linux IORESOURCE_IRQ_* defines: > * sense == 8: Level, low assertion > * sense == 2: Edge, high-to-low change > */ > ipic: [EMAIL PROTECTED] { > interrupt-controller; > #address-cells = <0>; > #interrupt-cells = <2>; > reg = <0x700 0x100>; > device_type = "ipic"; > }; > }; > > pci0: [EMAIL PROTECTED] { > cell-index = <1>; > interrupt-map-mask = <0xf800 0x0 0x0 0x7>; > interrupt-map = < > > /* IDSEL 0x11 */ > 0x8800 0x0 0x0 0x1 &ipic 20 0x8 > 0x8800 0x0 0x0 0x2 &ipic 21 0x8 > 0x8800 0x0 0x0 0x3 &ipic 22 0x8 > 0x8800 0x0 0x0 0x4 &ipic 23 0x8 > > /* IDSEL 0x12 */ > 0x9000 0x0 0x0 0x1 &ipic 22 0x8 > 0x9000 0x0 0x0 0x2 &ipic 23 0x8 > 0x9000 0x0 0x0 0x3 &ipic 20 0x8 > 0x9000 0x0 0x0 0x4 &ipic 21 0x8 > > /* IDSEL 0x13 */ > 0x9800 0x0 0x0 0x1 &ipic 23 0x8 > 0x9800 0x0 0x0 0x2 &ipic 20 0x8 > 0x9800 0x0 0x0 0x3 &ipic 21 0x8 > 0x9800 0x0 0x0 0x4 &ipic 22 0x8 > > /* IDSEL 0x15 */ > 0xa800 0x0 0x0 0x1 &ipic 20 0x8 > 0xa800 0x0 0x0 0x2 &ipic 21 0x8 > 0xa800 0x0 0x0 0x3 &ipic 22 0x8 > 0xa800 0x0 0x0 0x4 &ipic 23 0x8 > > /* IDSEL 0x16 */ > 0xb000 0x0 0x0 0x1 &ipic 23 0x8 > 0xb000 0x0 0x0 0x2 &ipic 20 0x8 > 0xb000 0x0 0x0 0x3 &ipic 21 0x8 > 0xb000 0x0 0x0 0x4 &ipic 22 0x8 > > /* IDSEL 0x17 */ > 0xb800 0x0 0x0 0x1 &ipic 22 0x8 > 0xb800 0x0 0x0 0x2 &ipic 23 0x8 > 0xb800 0x0 0x0 0x3 &ipic 20 0x8 > 0xb800 0x0 0x0 0x4 &ipic 21 0x8 > > /* IDSEL 0x18 */ > 0xc000 0x0 0x0 0x1 &ipic 21 0x8 > 0xc000 0x0 0x0 0x2 &ipic 22 0x8 > 0xc000 0x0 0x0 0x3 &ipic 23 0x8 > 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; > interrupt-parent = <&ipic>; > interrupts = <66 0x8>; > bus-range = <0 0>; > ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 > 0x10000000 > 0x42000000 0x0 0x80000000 0x80000000 0x0 > 0x10000000 > 0x01000000 0x0 0x00000000 0xe2000000 0x0 > 0x00100000>; > clock-frequency = <66666666>; > #interrupt-cells = <1>; > #size-cells = <2>; > #address-cells = <3>; > reg = <0xe0008500 0x100>; > compatible = "fsl,mpc8349-pci"; > device_type = "pci"; > }; > > pci1: [EMAIL PROTECTED] { > cell-index = <2>; > interrupt-map-mask = <0xf800 0x0 0x0 0x7>; > interrupt-map = < > > /* IDSEL 0x11 */ > 0x8800 0x0 0x0 0x1 &ipic 20 0x8 > 0x8800 0x0 0x0 0x2 &ipic 21 0x8 > 0x8800 0x0 0x0 0x3 &ipic 22 0x8 > 0x8800 0x0 0x0 0x4 &ipic 23 0x8 > > /* IDSEL 0x12 */ > 0x9000 0x0 0x0 0x1 &ipic 22 0x8 > 0x9000 0x0 0x0 0x2 &ipic 23 0x8 > 0x9000 0x0 0x0 0x3 &ipic 20 0x8 > 0x9000 0x0 0x0 0x4 &ipic 21 0x8 > > /* IDSEL 0x13 */ > 0x9800 0x0 0x0 0x1 &ipic 23 0x8 > 0x9800 0x0 0x0 0x2 &ipic 20 0x8 > 0x9800 0x0 0x0 0x3 &ipic 21 0x8 > 0x9800 0x0 0x0 0x4 &ipic 22 0x8 > > /* IDSEL 0x15 */ > 0xa800 0x0 0x0 0x1 &ipic 20 0x8 > 0xa800 0x0 0x0 0x2 &ipic 21 0x8 > 0xa800 0x0 0x0 0x3 &ipic 22 0x8 > 0xa800 0x0 0x0 0x4 &ipic 23 0x8 > > /* IDSEL 0x16 */ > 0xb000 0x0 0x0 0x1 &ipic 23 0x8 > 0xb000 0x0 0x0 0x2 &ipic 20 0x8 > 0xb000 0x0 0x0 0x3 &ipic 21 0x8 > 0xb000 0x0 0x0 0x4 &ipic 22 0x8 > > /* IDSEL 0x17 */ > 0xb800 0x0 0x0 0x1 &ipic 22 0x8 > 0xb800 0x0 0x0 0x2 &ipic 23 0x8 > 0xb800 0x0 0x0 0x3 &ipic 20 0x8 > 0xb800 0x0 0x0 0x4 &ipic 21 0x8 > > /* IDSEL 0x18 */ > 0xc000 0x0 0x0 0x1 &ipic 21 0x8 > 0xc000 0x0 0x0 0x2 &ipic 22 0x8 > 0xc000 0x0 0x0 0x3 &ipic 23 0x8 > 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; > interrupt-parent = <&ipic>; > interrupts = <67 0x8>; > bus-range = <0 0>; > ranges = <0x02000000 0x0 0xb0000000 0xb0000000 0x0 > 0x10000000 > 0x42000000 0x0 0xa0000000 0xa0000000 0x0 > 0x10000000 > 0x01000000 0x0 0x00000000 0xe2100000 0x0 > 0x00100000>; > clock-frequency = <66666666>; > #interrupt-cells = <1>; > #size-cells = <2>; > #address-cells = <3>; > reg = <0xe0008600 0x100>; > compatible = "fsl,mpc8349-pci"; > device_type = "pci"; > }; > }; > > > thanks > LK > > > ----- Original Message ---- > From: Grant Likely <[EMAIL PROTECTED]> > To: Laxmikant Rashinkar <[EMAIL PROTECTED]> > Cc: linuxppc-embedded@ozlabs.org > Sent: Friday, August 22, 2008 12:45:54 PM > Subject: Re: porting linux 2.6.27 to embedded powerpc board > > On Fri, Aug 22, 2008 at 12:26 PM, Laxmikant Rashinkar > <[EMAIL PROTECTED]> wrote: >> Hi, >> >> I still haven't gotten anything to work :-( >> >> I'm using Uboot 1.1.4 and Linux 2.6.27 but instead of using uImage, I'm >> using cuImage.<myboard> >> The args to dtc are as listed by David Jander > > Please post you .dts file and the filename you are using for it. > > g. > >> >> My cmd line args are: >> setenv bootargs root=/dev/ram0 init=/rescue rw console=ttyS0,9600 >> ramdisk_size=65536 >> >> When I attempt to boot my image it just hangs w/o any output. I dearly >> wish >> I could get some console output. >> Here is the actual display from uboot: >> >> ## Booting image at 00800000 ... >> Image Name: Linux-2.6.27-rc2 >> Image Type: PowerPC Linux Kernel Image (gzip compressed) >> Data Size: 1640425 Bytes = 1.6 MB >> Load Address: 00400000 >> Entry Point: 0040055c >> Verifying Checksum ... OK >> Uncompressing Kernel Image ... OK >> ## Loading RAMDisk Image at 01000000 ... >> Image Name: flash_root.ext3.gz >> Image Type: PowerPC Linux RAMDisk Image (gzip compressed) >> Data Size: 13450106 Bytes = 12.8 MB >> Load Address: 00000000 >> Entry Point: 00000000 >> Verifying Checksum ... OK >> Loading Ramdisk to 0f29d000, end 0ff70b7a ... OK >> >> Two questions: >> >> 1) the load address and entry point for the kernel (see above) are >> non-zero. >> When we load via uImage, they are always zero. Is this normal? dtc has not >> options to set the load address and entry point. >> >> 2) When I build my kernel, I get two warnings. Could these be causing a >> problem? >> >> WARNING: mm/built-in.o(.data+0x8ec): Section mismatch in reference from >> the >> variable contig_page_data to the variable .init.data:bootmem_node_data >> The variable contig_page_data references >> the variable __initdata bootmem_node_data >> If the reference is valid then annotate the >> variable with __init* (see linux/init.h) or name the variable: >> *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, >> *_console, >> >> >> MODPOST vmlinux.o >> WARNING: vmlinux.o(.data+0xfe74): Section mismatch in reference from the >> variable contig_page_data to the variable .init.data:bootmem_node_data >> The variable contig_page_data references >> the variable __initdata bootmem_node_data >> If the reference is valid then annotate the >> variable with __init* (see linux/init.h) or name the variable: >> *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, >> *_console, >> >> thanks so much for your help. >> >> LK >> >> ----- Original Message ---- >> From: David Jander <[EMAIL PROTECTED]> >> To: linuxppc-embedded@ozlabs.org >> Cc: Laxmikant Rashinkar <[EMAIL PROTECTED]> >> Sent: Thursday, August 21, 2008 2:43:45 AM >> Subject: Re: porting linux 2.6.27 to embedded powerpc board >> >> On Thursday 21 August 2008 01:24:46 Laxmikant Rashinkar wrote: >>> Hi, >>> >>> I have an embedded PowerPC (MPC8347) board that works fine with uboot and >>> Linux 2.6.15. >>> >>> I am trying to upgrade the kernel so that it runs on the latest release - >>> Linux 2.6.27. So far, I have gotten the kernel to compile on my platform, >>> but of course it does not boot. >> >> Well, honestly I don't know where to look for information either (other >> than >> the source-code and examples from others), but here is a list with points >> to >> look out for (I have just done the same thing as you for a MPC5200B-based >> board): >> >> 1. Upgrade to latest u-boot first (recent git seems to be fine). There >> have >> been a lot of changes in u-boot lately about OF and device-tree related >> things. I suspect you need a fairly recent version of u-boot to go well >> with >> the latest kernel. It's also generally a good idea IMHO. >> >> 2. I assume you are porting to arch/powerpc (the old arch/ppc you used >> back >> in >> 2.6.15 is obsolete and broken now). >> >> 3. Look at other platforms that use the same processor, and pick a simple >> one >> as starting point. Look out for the dts (device-tree-source file in >> arch/powerpc/boot/dts), copy and modify one to reflect your hardware. >> Recently a lot of changes happend in the kernel, changing device names, >> obsoleting "device-type" tags, etc..., so some of the current DTS sources >> included in the kernel might not even work (wrong device name, missing >> information, wrong use of "device-type", etc...), so watch out for these >> kind >> of issues too. >> >> 4. Be sure that the device(s) necessary to produce output on your console >> are >> correctly placed in the DT. Also make sure that u-boot knows about it >> (#define OF_STDOUT_PATH... in your u-boot board config file) >> >> 5. When compiling the device tree, it may be necessary to add some extra >> reserved entries to the compiled tree (I am using dtc -p 10240 -R 20, >> which >> might be slightly exaggerated), because u-boot may add something to it, >> and >> if it can't, linux won't boot. >> >> 6. Remember to always specify the "rootfstype=" option on the commandline >> if >> booting from anything other than NFS. This was not necessary back in the >> 2.6.15-times AFAICR. >> >> 7. Boot with a device-tree (in u-boot: "bootm $addrofkernel - $addrofdtb", >> don't forget the dash if you are not using an initrd). If you don't do >> this, >> u-boot can't fix your DT, and the kernel probably won't find it either. >> >> 8. Be sure to use the correct version of the DTC (DT compiler) for your >> kernel >> (the sources are included nowadays, somewhere in arch/powerpc/boot IIRC). >> The >> command used to compile, should probably be something like this: >> >> $ ./dtc -p 10240 -R 20 -I dts -o myplatform.dtb -O dtb -b 0 >> dts/myplatform.dts >> >> Load the resulting .dtb file directly with u-boot (don't make an u-image >> out >> of it). >> >> That's all I remember right now... hope it helps. >> >> Regards, >> >> -- >> David Jander >> >> >> _______________________________________________ >> Linuxppc-embedded mailing list >> Linuxppc-embedded@ozlabs.org >> https://ozlabs.org/mailman/listinfo/linuxppc-embedded >> > > > > -- > Grant Likely, B.Sc., P.Eng. > Secret Lab Technologies Ltd. > > -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded