linuxppc-embedded  

Messages by Thread

• • Status of uart driver on mpc8xx in 2.6 Robert P. J. Day
  • Status of uart driver on mpc8xx in 2.6 Sam Song
• Full duplex, MDIO and both Ethernet in MPC8272ADS [EMAIL PROTECTED]
  • Full duplex, MDIO and both Ethernet in MPC8272ADS Matt Porter
  • Full duplex, MDIO and both Ethernet in MPC8272ADS Jaap-Jan Boor
  • full duplex, mdio and both ethernet in mpc8272ads Bastos Fernandez Alexandre
• throughput question Marc Leeman
  • throughput question Matt Porter
  • throughput question Fillod Stephane
• I2C/SPI/SMC relocation patch works for both SMC 1 and 2? Robert P. J. Day
  • I2C/SPI/SMC relocation patch works for both SMC 1 and 2? Wolfgang Denk
  • I2C/SPI/SMC relocation patch works for both SMC 1 and 2? Robert P. J. Day
  • I2C/SPI/SMC relocation patch works for both SMC 1 and 2? Wolfgang Denk
• [PATCH][PPC32] Fix PFC1_EPS and PFC1_EPS_SHIFT definitions for IBM440GX Gerhard Jaeger
• Is anyone using Critical Interrupts on PPC440 in 2.4 ? Matt Porter
• powerpc with gigabit card hanging Matt Porter
  • powerpc with gigabit card hanging Matt Porter
  • powerpc with gigabit card hanging Segher Boessenkool
  • powerpc with gigabit card hanging Matt Porter
  • powerpc with gigabit card hanging Segher Boessenkool
  • powerpc with gigabit card hanging Matt Porter
  • powerpc with gigabit card hanging Segher Boessenkool
  • powerpc with gigabit card hanging Matt Porter
  • powerpc with gigabit card hanging Segher Boessenkool
  • powerpc with gigabit card hanging David Gardiner
  • powerpc with gigabit card hanging Matt Porter
  • powerpc with gigabit card hanging David Gardiner
  • Fwd: powerpc with gigabit card hanging Segher Boessenkool
• [NOTICE] List description/usage changes Matt Porter
• 2.6.x on 405CR Matt Porter
  • 2.6.x on 405CR Matt Porter
  • 2.6.x on 405CR Piotr Perak
  • 2.6.x on 405CR Matt Porter
  • 2.6.x on 405CR Piotr Perak
  • 2.6.x on 405CR Matt Porter
  • 2.6.x on 405CR Mark Chambers
  • 2.6.x on 405CR Piotr Perak
  • 2.6.x on 405CR Jon Masters
  • 2.6.x on 405CR Mark Chambers
  • 2.6.x on 405CR Jon Masters
• [PATCH] to support choice of 8xx microcode patch Robert P. J. Day
  • [PATCH] to support choice of 8xx microcode patch Wolfgang Denk
  • [PATCH] to support choice of 8xx microcode patch Robert P. J. Day
  • [PATCH] to support choice of 8xx microcode patch Robert P. J. Day
  • [PATCH] to support choice of 8xx microcode patch Wolfgang Denk
  • [PATCH] to support choice of 8xx microcode patch Robert P. J. Day
• 2.6.8.1 not booting on 405CR Piotr Perak
• Does ext2 based on MTD acceptable for Embedded Development? Rupesh S
  • Does ext2 based on MTD acceptable for Embedded Development? Wolfgang Denk
  • RPXlite DW boot time Olympic Games - ext2 Win Out! Sam Song
• 440SP evaluation board? Gary McKenna
• Kernel oops when initializing ethernet driver Patrick Huesmann
  • Kernel oops when initializing ethernet driver Patrick Huesmann
  • Kernel oops when initializing ethernet driver Patrick Huesmann
  • Kernel oops when initializing ethernet driver Andrei Konovalov
  • Kernel oops when initializing ethernet driver Patrick Huesmann
  • Kernel oops when initializing ethernet driver Patrick Huesmann
• [RFC] Remove G2_LE core decl from CLASSIC_PPC part of arch/ppc/kernel/cputable.c Andrey Volkov
  • [RFC] Remove G2_LE core decl from CLASSIC_PPC part of arch/ppc/kernel/cputable.c Kumar Gala
  • [RFC] Remove G2_LE core decl from CLASSIC_PPC part of arch/ppc/kernel/cputable.c Andrey Volkov
  • [RFC] Remove G2_LE core decl from CLASSIC_PPC part of arch/ppc/kernel/cputable.c Dan Malek
  • [RFC] Remove G2_LE core decl from CLASSIC_PPC part of arch/ppc/kernel/cputable.c Andrey Volkov
  • [RFC] Remove G2_LE core decl from CLASSIC_PPC part of arch/ppc/kernel/cputable.c Dan Malek
• ushort fcc_fcce Jaap-Jan Boor
  • ushort fcc_fcce Pantelis Antoniou
  • ushort fcc_fcce Dan Malek
  • ushort fcc_fcce Jaap Jan Boor
• UDP packet loss (8xx/2.4.26) Smith, Craig
  • UDP packet loss (8xx/2.4.26) Eugene Surovegin
• m8xx hang in reboot (fwd) Mark S. Mathews
  • m8xx hang in reboot (fwd) Mark S. Mathews
  • m8xx hang in reboot (fwd) VanBaren, Gerald (AGRE)
  • m8xx hang in reboot (fwd) Mark S. Mathews
• Uboot SMC2 Balajee Premraj
  • Uboot SMC2 Wolfgang Denk
• m8xx hang in reboot Mark S. Mathews
  • m8xx hang in reboot Dan Malek
  • m8xx hang in reboot Mark S. Mathews
  • m8xx hang in reboot Stefan Stürke
  • [SPAM] Re: m8xx hang in reboot Mark S. Mathews
  • [SPAM] Re: m8xx hang in reboot Gary Thomas
  • [SPAM] Re: m8xx hang in reboot Dan Malek
  • [SPAM] Re: m8xx hang in reboot Mark S. Mathews
• ppc-linux still not booting on my virtexII board Patrick Huesmann
  • ppc-linux still not booting on my virtexII board Scott Anderson
  • ppc-linux still not booting on my virtexII board Patrick Huesmann
  • ppc-linux still not booting on my virtexII board Patrick Huesmann
• mpc5200 and ddr Andrey Volkov
  • mpc5200 and ddr Andrey Volkov
  • mpc5200 and ddr Andrew Dennison
  • mpc5200 and ddr Mark Chambers
  • mpc5200 and ddr Ho Jeffrey-r26191
• graphic card framebuffer Ronen Shitrit
• Current PPC 2.4 kernel trees? Andriy Korud
  • Current PPC 2.4 kernel trees? Matt Porter
  • Current PPC 2.4 kernel trees? Andriy Korud
• Problem trying to address custom hardware Oliver King-Smith
  • Problem trying to address custom hardware Eugene Surovegin
  • Problem trying to address custom hardware Matt Porter
  • Problem trying to address custom hardware Rupesh S
  • Problem trying to address custom hardware Oliver King-Smith
  • Problem trying to address custom hardware Matt Porter
• MPC8560 util.S compilation error with E500 core support Gérard Guével
  • MPC8560 util.S compilation error with E500 core support Kumar Gala
• MPC8560 boot console (CPM SCC) driver problem Gérard Guével
  • MPC8560 boot console (CPM SCC) driver problem Kumar Gala
• value of XIP? and whether it works with 2.6 kernel? Robert P. J. Day
  • value of XIP? and whether it works with 2.6 kernel? Wolfgang Denk
  • value of XIP? and whether it works with 2.6 kernel? Mark Chambers
  • value of XIP? and whether it works with 2.6 kernel? Dan Malek
  • value of XIP? and whether it works with 2.6 kernel? Mark Chambers
  • value of XIP? and whether it works with 2.6 kernel? Dan Malek
  • value of XIP? and whether it works with 2.6 kernel? David Woodhouse
  • value of XIP? and whether it works with 2.6 kernel? Dan Malek
• RFI doesn't branch off? Amit Shah
  • RFI doesn't branch off? Amit Shah
  • RFI doesn't branch off? Saari, James
• [RFC] Re: BestComm and fec Andrey Volkov
  • [RFC] Re: BestComm and fec Sylvain Munaut
  • [RFC] Re: BestComm and fec David Woodhouse
  • [RFC] Re: BestComm and fec Andrey Volkov
  • [RFC] MPC5200 dev (was Re: [RFC] Re: BestComm and fec) Sylvain Munaut
  • [RFC] MPC5200 dev (was Re: [RFC] Re: BestComm and fec) Andrey Volkov
  • [RFC] Re: BestComm and fec Dale Farnsworth
• How to port ppc-linux to new custom boards? (virtexII) Patrick Huesmann
  • How to port ppc-linux to new custom boards? (virtexII) Song Sam
  • How to port ppc-linux to new custom boards? (virtexII) Peter Ryser
  • How to port ppc-linux to new custom boards? (virtexII) Peter 'p2' De Schrijver
  • How to port ppc-linux to new custom boards? (virtexII) Patrick Huesmann
  • How to port ppc-linux to new custom boards? (virtexII) Peter 'p2' De Schrijver
  • How to port ppc-linux to new custom boards? (virtexII) Song Sam
  • How to port ppc-linux to new custom boards? (virtexII) Song Sam
  • How to port ppc-linux to new custom boards? (virtexII) Patrick Huesmann
  • How to port ppc-linux to new custom boards? (virtexII) Marc Leeman
  • How to port ppc-linux to new custom boards? (virtexII) Marius Groeger
  • How to port ppc-linux to new custom boards? (virtexII) Marc Leeman
  • How to port ppc-linux to new custom boards? (virtexII) David Ho
  • How to port ppc-linux to new custom boards? (virtexII) Peter Vandenabeele
  • Handling of cascaded interrupt controllers Jeff Domogala
  • How to port ppc-linux to new custom boards? (virtexII) Marc Leeman
  • How to port ppc-linux to new custom boards? (virtexII) Oliver Fuchs
  • How to port ppc-linux to new custom boards? (virtexII) Peter Ryser
  • How to port ppc-linux to new custom boards? (virtexII) Patrick Huesmann
• [Fwd: Evaluation boarf for MPC8270] Frank Robbins
• port from 2.4.21 to 2.6.8 for mpc5200 - part 1 Andrey Volkov
  • port from 2.4.21 to 2.6.8 for mpc5200 - part 1 Sam Ravnborg
  • port from 2.4.21 to 2.6.8 for mpc5200 - part 1 Wolfgang Denk
• Evaluation boarf for MPC8270 annamaya
• 405GPr PCI target/host Steven Blakeslee
  • 405GPr PCI target/host Eugene Surovegin
  • 405GPr PCI target/host Adrian Cox
  • 405GPr PCI target/host Carl Aage Amundsen
  • 405GPr PCI target/host Eugene Surovegin
• PCI problem on MPC8250 target Conor McLoughlin
  • Anyone with MPC82xx PCI on kernel 2.6? Conor McLoughlin
  • Anyone with MPC82xx PCI on kernel 2.6? Conor McLoughlin
• 405EP and pci_alloc_consistent() Mark S. Mathews
  • 405EP and pci_alloc_consistent() Eugene Surovegin
  • 405EP and pci_alloc_consistent() Mark S. Mathews
• [RFC] Test patch for Sandpoint X2 Adrian Cox
  • [RFC] Test patch for Sandpoint X2 Dan Malek
  • 30MB ramdisk needs more than 64MB SDRAM? Song Sam
  • How to check MTD partition content? Song Sam
  • How to check MTD partition content? Wolfgang Grandegger
  • How to check MTD partition content? Song Sam
  • [RFC] Test patch for Sandpoint X2 Tom Rini
  • [RFC] Test patch for Sandpoint X2 Adrian Cox
• inline assembly code in MPC8245... m madhuker
• No L2 Cache on PReP Machine Hager, Johannes, HRD/AB
  • No L2 Cache on PReP Machine Adrian Cox
  • No L2 Cache on PReP Machine Hager, Johannes, HRD/AB
  • No L2 Cache on PReP Machine Adrian Cox
• MPC855T Sulamita Garcia
• Issues with raw write using MTD Char Driver Raghav K
  • Issues with raw write using MTD Char Driver Wolfgang Denk
• PCI scanning and devices initialization Stefano Gaiotto
  • PCI scanning and devices initialization Sylvain Munaut
  • PCI scanning and devices initialization [EMAIL PROTECTED]
  • PCI scanning and devices initialization Stefano Gaiotto
  • PCI scanning and devices initialization Steve Boorman
  • PCI scanning and devices initialization Stefano Gaiotto
  • PCI scanning and devices initialization Stefano Gaiotto
• Fw: MPHY supported in mpc8260sar Zoran Stojsavljevic
  • [Linux-ATM-General] Fw: MPHY supported in mpc8260sar Gilad Rom
  • [Linux-ATM-General] Fw: MPHY supported in mpc8260sar Zoran Stojsavljevic
• uart.c doesn't compile Jaap-Jan Boor
  • uart.c doesn't compile Kumar Gala
• 8260 FCC buffer underrun Jeff Angielski
  • 8260 FCC buffer underrun VanBaren, Gerald (AGRE)
• how to choose cpu with pci and fec function ?? Michael Hao
  • how to choose cpu with pci and fec function ?? Wolfgang Denk
• Poor IDE performance on Linux 2.6.x Felix Domke
• JTAG debug mechanism Li Yang-r58472
  • JTAG debug mechanism Dan Malek
  • JTAG debug mechanism Song Sam
  • JTAG debug mechanism Mark Chambers
  • JTAG debug mechanism Wolfgang Denk
  • JTAG debug mechanism Song Sam
• How to boot U-Boot from RAM Junita Ajith
  • How to boot U-Boot from RAM Wolfgang Denk

• Earlier messages
• Later messages