> now, when this happened, I noticed my system clock went rogue - for some
> reason it thinks it's July 11th 12:00 am (it's configured toget time
> automatically from the internet)
>That is strange. You must be sure to turn off NTP first, if you want
>to use phc2sys (or ptp4l with SW time stamping). Otherwise, the two
>programs will fight each other.
I don't think I have ntp running:
sudo /etc/init.d/ntp stop
sudo: /etc/init.d/ntp: command not found
sudo service ntp stop
ntp: unrecognized service
that's what I found online about stopping ntp at least; is there some other
command I'm supposed to run?
> 2. why did my system clock decide to change tu such an awkward value?
>Are you perhaps still using SW time stamping? That would explain it.
I'm actually using HW timestamping and can't find anything on the internet
about this problem...
Thanks,
Andrei
On Wed, Jun 18, 2014 at 5:10 PM, Richard Cochran <richardcoch...@gmail.com>
wrote:
> On Wed, Jun 18, 2014 at 04:49:38PM +0100, Andrei Perietanu wrote:
> > I tried the easy option *run ptp4l with the '-2' (L2 transport) flag* but
> > that changed nothing... so I tried something different: I changed
> > tx_timestamp_timeout from 1000 to 100 and now I get some output on the
> > slave node.
>
> That is really very suspicious. I think this must be a red herring,
> and something *else* changed.
>
> > The output of the master node:
> >
> > ptp4l[622024.340]: selected /dev/ptp1 as PTP clock
> > ptp4l[622024.340]: port 1: INITIALIZING to LISTENING on INITIALIZE
> > ptp4l[622024.340]: port 0: INITIALIZING to LISTENING on INITIALIZE
> > ptp4l[622026.448]: port 1: new foreign master 00e04b.fffe.3b5762-1
> > ptp4l[622030.527]: selected best master clock 00e04b.fffe.3b5762
> > ptp4l[622030.527]: assuming the grand master role
> > ptp4l[622030.527]: port 1: LISTENING to GRAND_MASTER on RS_GRAND_MASTER
> >
> > and that's it..stops at that
>
> Normal for a master node.
>
> > The output of the slave node:
> >
> > ptp4l[459942.424]: selected /dev/ptp0 as PTP clock
> > ptp4l[459942.425]: port 1: INITIALIZING to LISTENING on INITIALIZE
> > ptp4l[459942.425]: port 0: INITIALIZING to LISTENING on INITIALIZE
> > ptp4l[459949.497]: port 1: LISTENING to MASTER on
> > ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES
> > ptp4l[459949.497]: selected best master clock 00e04b.fffe.3b5762
> > ptp4l[459949.497]: assuming the grand master role
> > ptp4l[459953.600]: port 1: new foreign master 002590.fffe.f2c1e4-1
> > ptp4l[459957.700]: selected best master clock 002590.fffe.f2c1e4
> > ptp4l[459957.700]: port 1: MASTER to UNCALIBRATED on RS_SLAVE
> ...
> > ptp4l[459976.701]: master offset 145 s2 freq +16538 path delay
> 16238
>
> This is also working.
>
> > now, when this happened, I noticed my system clock went rogue - for some
> > reason it thinks it's July 11th 12:00 am (it's configured toget time
> > automatically from the internet)
>
> That is strange. You must be sure to turn off NTP first, if you want
> to use phc2sys (or ptp4l with SW time stamping). Otherwise, the two
> programs will fight each other.
>
> > So, two questions come to mind:
> > 1. is ptp working correcly now? O sould I see some messages on the
> master's
> > console as well
>
> Yes, looks like it.
>
> > 2. why did my system clock decide to change tu such an awkward value?
>
> Are you perhaps still using SW time stamping? That would explain it.
>
> Thanks,
> Richard
>
--
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of or
taking of any action in reliance upon this information by persons or
entities other than the intended recipient is prohibited. If you receive
this in error please contact the sender and delete the material from any
computer immediately. It is the policy of Klas Limited to disavow the
sending of offensive material and should you consider that the material
contained in the message is offensive you should contact the sender
immediately and also your I.T. Manager.
Klas Telecom Inc., a Virginia Corporation with offices at 1101 30th St. NW,
Washington, DC 20007.
Klas Limited (Company Number 163303) trading as Klas Telecom, an Irish
Limited Liability Company, with its registered office at Fourth Floor, One
Kilmainham Square, Inchicore Road, Kilmainham, Dublin 8, Ireland.
------------------------------------------------------------------------------
HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
Find What Matters Most in Your Big Data with HPCC Systems
Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
Leverages Graph Analysis for Fast Processing & Easy Data Exploration
http://p.sf.net/sfu/hpccsystems
_______________________________________________
Linuxptp-devel mailing list
Linuxptp-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linuxptp-devel
