> From: Keller, Jacob E [mailto:jacob.e.kel...@intel.com]
> Sent: Friday, November 13, 2020 5:33 AM
> To: pavan-lakote; 'Richard Cochran'
> Cc: linuxptp-users@lists.sourceforge.net
> Subject: RE: [Linuxptp-users] switchover fails when having multiple unicast
> master
>
>
>
> > -----Original Message-----
> > From: pavan-lakote <pavan-lak...@looptelecom.com>
> > Sent: Wednesday, November 11, 2020 7:57 PM
> > To: 'Richard Cochran' <richardcoch...@gmail.com>
> > Cc: linuxptp-users@lists.sourceforge.net
> > Subject: Re: [Linuxptp-users] switchover fails when having multiple unicast
> > master
> >
> > >
> > > Why don't you want to synchronize the local clock?
> >
> > We do synchronize the clock but using our own clock servo algorithm.
> > That's the reason we wanted to run ptp4l as free running clock.
> > Is there anything I'm missing here to understand?
> >
>
> You could implement this new servo algorithm in the same manner that
> existing servo algorithms are done in the code base. The interface is
> intentionally decided to allow new algorithms to be added. Doing so would
> mean it could integrate properly and would cause the state transitions to
> occur as expected.
Sure, will try.
Thanks.
Pavan Lakote
>
> Thanks,
> Jake
Loop Telecommunication International
Loop-V4150
DS0 Cross Connect Multiplexer supports up to 504E1/672T1 worth of DS0
non-blocking cross connect matrix. The V4150 DS0 Cross Connect System can
provide users with the high-density capacity up to 504 E1/T1, 24 T3MX3, or 8
STM-1 (OC-3). All interfaces are fully compliant for use with the relevant ETSI
standards and ITU recommendations. In addition, Loop-V4150 with E1/T1 cards,
through the protection relay shelf, is able to perform 1+1, 1:N and 1:1
redundancy switching to ensure the high-availability circuit system.
For further arrangement and more information, please contact Loop Telecom.
_______________________________________________
Linuxptp-users mailing list
Linuxptp-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linuxptp-users
