Hello Dennys, Miroslav. I will try your suggestions. Thank you both for the help
BR. Em qua., 24 de mai. de 2023 às 14:50, Dennis Hagarty (dehagart) <dehag...@cisco.com> escreveu: > > Hi, > > Yes, I think so. > > The GM will send those values in the Announce message and you pick it up with > -w > If it's not, you can configure the offset locally on the client end with -O > > Regards > Dennis > > -----Original Message----- > From: Miroslav Lichvar <mlich...@redhat.com> > Sent: Wednesday, May 24, 2023 3:51 PM > To: Elder Costa <elder.co...@timpelmedical.com> > Cc: linuxptp-users@lists.sourceforge.net > Subject: Re: [Linuxptp-users] Offset between TAI and PHC > > On Wed, May 24, 2023 at 08:19:37AM -0300, Elder Costa wrote: > > phc latency: 7472 > > phc-rt delta: 37000039320 > > phc-tai delta: 37000039035 > > > > phc-tai delta is greater than 50 usec ! > > TAI offset set in kernel is not correct ! > > I think you need to set currentUtcOffsetValid and timeTraceable on the > GM with a pmc SET GRANDMASTER_SETTINGS_NP command for the client's > phc2sys to actually set the TAI-UTC offset of the system clock. > > -- > Miroslav Lichvar > > > > _______________________________________________ > Linuxptp-users mailing list > Linuxptp-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/linuxptp-users _______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
