On Wed, Nov 02, 2011 at 08:59:55AM -0500, Chris Bagwell wrote: > xsetwacom's TabletPCButton == xinput's "Wacom Hover Click".
Well, I did try TabletPCButton before, and it did not work. After trying it again, it seems like the value xsetwacom --set 13 TabletPCButton on wont stick. A subsequent xsetwacom --get 13 all still reports the setting to be off (and off->on doesn't work either). Apparently, only xinput cli is able to affect that settings. Thanks for clarifying that the two options actually refer to the same property. As for the manpage, I think synaptics (as other drivers) do only tell about the mapping "xinput property->xorg.conf entry", since with them there are no such sort of "inconsistencies" as with the wacom, which offers a dedicated tool to superseede xinput (there still is synclient, but it doesn't specify such a mapping either). Isn't it possible to simply offer *absolutely no* properties through xinput cli (except the few generic ones) and have it all through xsetwacom (not until xsetwacom can properly set TabletPCButton, of course :p) - that would perhaps be more consistent and clear. Not that it would be a big problem, whatsoever (apart from that xsetwacom can't affect that settings, which probabaly is a bug, but I'll verify it with current GIT before calling it such) Thanks. > > Agree it would be nice to include a xsetwacom to X properties > conversion table in man pages; similar to how "man synaptics" does it. > > Patches welcome (since this is on the developers list)! > > Chris > > On Wed, Nov 2, 2011 at 8:50 AM, Cedric Sodhi <[email protected]> wrote: > > Well, this is interesting. I found the solution which is rather easy, > > yet not all that obvious to find. > > > > Apparently xinput (cli tool) offers a setting "Wacom Hover Click" which > > turns the side button on. > > > > Of course that yields the question why that setting is not covered by > > xsetwacom. Is it that some settings can only be set by xinput cli and > > others only by xsetwacon cli? Sounds a little strange to me - I would > > rather expect all settings to be handled by xsetwacom (I would even > > prefer if all settings were handled by xinput). > > > > On Wed, Nov 02, 2011 at 11:52:59AM +0100, Cedric Sodhi wrote: > >> Hello, the device is a 056a:0090 n USB. I'm 99.99% certain that the > >> button on the side of my stylus used to work, but it no longer does. GPM > >> and the event interface still respond to the button (GPM pastes, when I > >> press it, which means it is reported as the right button), but there is > >> no response to it in X. I use 0.11.1 - I'm just puzzled because it used > >> to work (afaicr - I haven't been using that pc for long). > >> > >> I don't think I've updated xf86-input-wacom since it used to work. I'm > >> actually positive I did not. > >> > >> Any idea how to find out what's wrong? xsetwacom --get ... all returns > >> > >> Button requires exactly 1 values > >> > >> Which I think refers to the click with the pen, not the button. > >> > >> Thanks for your help, > >> Cedric > >> > >> ------------------------------------------------------------------------------ > >> RSA® Conference 2012 > >> Save $700 by Nov 18 > >> Register now! > >> http://p.sf.net/sfu/rsa-sfdev2dev1 > >> _______________________________________________ > >> Linuxwacom-devel mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/linuxwacom-devel > > > > ------------------------------------------------------------------------------ > > RSA® Conference 2012 > > Save $700 by Nov 18 > > Register now! > > http://p.sf.net/sfu/rsa-sfdev2dev1 > > _______________________________________________ > > Linuxwacom-devel mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/linuxwacom-devel > > ------------------------------------------------------------------------------ RSA® Conference 2012 Save $700 by Nov 18 Register now! http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Linuxwacom-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/linuxwacom-devel
