Hi once again,
found was a bad solder connection on the adjusting pots mounted on the
board that the flyback transformer is on.
The flyback coil is NOT mounted on the analog-video-board. You can see
the flyback, when looking from top of the opened Lisa besite the tube
and down on the bottom of the case cou can see a black flyback coil
approx 3 fingers diameter (or 5cm or 2 inch), with (if I remember
right) 6 cables in and one thick brown or red cable out, which is going
to a rubberred connector at the top reverse side of the tube.
This connection is under high-voltage !!!
Despite of that, the analog-video-board behind the tube has a coil,
too. But it's not the flyback. It's a serial connected coil to the
deflection unit of the tube.
greetings TOM from Bavaria
--
LisaList is sponsored by <http://lowendmac.com/> and...
Shop buy.com and save. <http://lowendmac.com/ad/buy.com.html>
Support Low End Mac <http://lowendmac.com/lists/support.html>
LisaList info: <http://lowendmac.com/lists/lisa.html>
--> AOL users, remove "mailto:"
Send list messages to: <mailto:lisalist@mail.maclaunch.com>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/lisalist%40mail.maclaunch.com/>
iPod Accessories for Less
at 1-800-iPOD.COM
Fast Delivery, Low Price, Good Deal
www.1800ipod.com