From left to right 8 connectors with 7 cables are: (+5V) (+12V) () (Ground) (+12V) () (empty) (-12V)
Ok, I'm testing her now, that this is what I've gotten.
The +5v wire has .02v on it when the lisa is 'off'. It jumps up to.7 when I press the button. It might be more... my meter takes a few moments to register the voltage.
The +12v wire has .02v on it when lisa is 'off'. Jumps to 7.2 when I press the button.
The open line has .02v on it when lisa is 'off'. Goes to 0 for as long as I hold the button in.
The seccond +12v line has .02v on it when lisa is 'off'. Jumps to 7.2 when I press the button.
The next open line never has any voltage.
The empty one has no wire :P
The -12v line reads 0 when the lisa is 'off'. jumps to -4.3 when I press the button.
I confirmed that the voltages that I got when Lisa is 'off' are actually voltages, not just my meter by unpluggin the power cord. They went to 0 a few moments after.
Like I said before, my meter takes a few moments to display the voltage on the screen, so The values might be more. (For example, if I test the wall voltage, it takes it about 2/3 of a seccond to display 120)
Yes, I realize the dangers of high voltages. I do refocus monitors from time to time. But I try to avoid high voltage whenever possible ;)
THANKS!
-Jason
-- LisaList is sponsored by <http://lowendmac.com/> and...
Shop buy.com and save. <http://lowendmac.com/ad/buy.com.html>
Support Low End Mac <http://lowendmac.com/lists/support.html>
LisaList info: <http://lowendmac.com/lists/lisa.html> --> AOL users, remove "mailto:" Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/lisalist%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com