Hi Jason, it's very likely the PSU itself. Check the PSU with shortcut of PIN 20 (component side) and at the same position below X (bottom side) of the PSU board. These two connectors have to be shortcut; that's the trick to get the PSU work in stand-alone-mode
Measure PIN 13up to18 = Ground with PIN 20 5V Standby PIN 19 -5V PIN 11or12 +5V PIN 9or10 +12V and at the bottom side PIN W (the 4th from right side) = -12V Be careful: High Voltage ! greetings TOM from Bavaria -- LisaList is sponsored by <http://lowendmac.com/> and... Shop buy.com and save. <http://lowendmac.com/ad/buy.com.html> Support Low End Mac <http://lowendmac.com/lists/support.html> LisaList info: <http://lowendmac.com/lists/lisa.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/lisalist%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
