I have a pfsense 2.0.1 -Release (i386) it has dual wans (wan &
wan2(opt1)) its been working great, but last night I had to change the
ip address and gateway for wan and since this change i cannot route
anything out of wan interface, wan2 still works fine. I had had this
issue once before and to get around it I just reloaded pfsense and
started over but that isnt really an option this time.
lan = xl0 (it is down nothing connected to it)
wireless_lan = fxp0
wan = fxp1
wan2 = pppoe0
here is some info, Im not sure what log / info is needed to help track
this down.
------------------------------
netstat -nr
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
4.2.2.1 75.151.255.86 UGHS 0 1364 fxp1
4.2.2.2 10.11.1.1 UGHS 0 8172 pppoe0
10.11.1.1 link#10 UH 0 0 pppoe0
75.146.66.157 10.11.1.1 UGHS 0 177702 pppoe0
75.151.255.80/29 link#2 U 0 2920 fxp1
75.151.255.85 link#2 UHS 0 0 lo0
127.0.0.1 link#6 UH 0 1989 lo0
141.151.247.218 127.0.0.1 UH 0 0 lo0
192.168.40.0/24 link#4 U 0 0 xl0
192.168.40.1 link#4 UHS 0 0 lo0
192.168.41.0/24 link#1 U 0 319081 fxp0
192.168.41.1 link#1 UHS 0 0 lo0
Internet6:
Destination Gateway
Flags Netif Expire
::1 ::1
UH lo0
fe80::%fxp0/64 link#1
U fxp0
fe80::203:47ff:fedc:6f08%fxp0 link#1
UHS lo0
fe80::%fxp1/64 link#2
U fxp1
fe80::250:8bff:fe66:b63c%fxp1 link#2
UHS lo0
fe80::%fxp2/64 link#3
U fxp2
fe80::250:8bff:fe66:b63d%fxp2 link#3
UHS lo0
fe80::%xl0/64 link#4
U xl0
fe80::250:daff:fe80:3b8c%xl0 link#4
UHS lo0
fe80::%lo0/64 link#6
U lo0
fe80::1%lo0 link#6
UHS lo0
fe80::%pppoe0/64 link#10 U
pppoe0
fe80::203:47ff:fedc:6f08%pppoe0 link#10
UHS lo0
ff01:1::/32 fe80::203:47ff:fedc:6f08%fxp0
U fxp0
ff01:2::/32 fe80::250:8bff:fe66:b63c%fxp1
U fxp1
ff01:3::/32 fe80::250:8bff:fe66:b63d%fxp2
U fxp2
ff01:4::/32 fe80::250:daff:fe80:3b8c%xl0
U xl0
ff01:6::/32 ::1
U lo0
ff01:a::/32 fe80::203:47ff:fedc:6f08%pppoe0
U pppoe0
ff02::%fxp0/32 fe80::203:47ff:fedc:6f08%fxp0
U fxp0
ff02::%fxp1/32 fe80::250:8bff:fe66:b63c%fxp1
U fxp1
ff02::%fxp2/32 fe80::250:8bff:fe66:b63d%fxp2
U fxp2
ff02::%xl0/32 fe80::250:daff:fe80:3b8c%xl0
U xl0
ff02::%lo0/32 ::1
U lo0
ff02::%pppoe0/32 fe80::203:47ff:fedc:6f08%pppoe0
U pppoe0
---------------------------------------------------------
ifconfig
fxp0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,IPFW_FILTER>
metric 0 mtu 1500
options=2009<RXCSUM,VLAN_MTU,WOL_MAGIC>
ether 00:03:47:dc:6f:08
inet 192.168.41.1 netmask 0xffffff00 broadcast 192.168.41.255
inet6 fe80::203:47ff:fedc:6f08%fxp0 prefixlen 64 scopeid 0x1
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 00:50:8b:66:b6:3c
inet6 fe80::250:8bff:fe66:b63c%fxp1 prefixlen 64 scopeid 0x2
inet 75.151.255.85 netmask 0xfffffff8 broadcast 75.151.255.87
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
fxp2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 00:50:8b:66:b6:3d
inet6 fe80::250:8bff:fe66:b63d%fxp2 prefixlen 64 scopeid 0x3
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80009<RXCSUM,VLAN_MTU,LINKSTATE>
ether 00:50:da:80:3b:8c
inet 192.168.40.1 netmask 0xffffff00 broadcast 192.168.40.255
inet6 fe80::250:daff:fe80:3b8c%xl0 prefixlen 64 scopeid 0x4
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
media: Ethernet autoselect (none)
status: no carrier
plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
pfsync0: flags=0<> metric 0 mtu 1460
syncpeer: 224.0.0.240 maxupd: 128 syncok: 1
pflog0: flags=100<PROMISC> metric 0 mtu 33200
enc0: flags=41<UP,RUNNING> metric 0 mtu 1536
pppoe0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST>
metric 0 mtu 1492
inet 141.151.247.218 --> 10.11.1.1 netmask 0xffffffff
inet6 fe80::203:47ff:fedc:6f08%pppoe0 prefixlen 64 scopeid 0xa
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536
Please let me know what else I can provide to help track this issue down.
Thank you
Dickie
--
Dickie Bradford
The man who sais it cannot be done, should not interupt
the man who is trying to do it!
_______________________________________________
List mailing list
List@lists.pfsense.org
http://lists.pfsense.org/mailman/listinfo/list