On 23 apr. 2012, at 19:28, Ernst den Broeder wrote:

> Hi All.
> 
> I am trying to work through a kernel crash I keep having with pfSense 2.0.1 
> on Alix 2d13 hardware (my home router).  This has been going on for about 3-4 
> weeks now.  The crash happens about every 2 days, but it varies.  Some times 
> it is up 4 days without crashing, other days it is up only 24 hrs.  Today, it 
> happened 3 times so far...
> 
> Some of the things I have tried:
> - swapped Alix 2d13 hardware with known stable unit (I transferred only the 
> CF card over)
> - deleted config and rebuilt it
> 
> The kernel crash (I've pasted today's crashes below) seems to originate from 
> the vr0 interface (LAN side).
> 
> I am wondering if anyone here has any ideas that I can try or suggestions to 
> go about finding what the cause might be.  This pfSense installation was 
> stable until this started happening.
> 

Sounds crazy perhaps, but did you try to swap the power adapter (12V I presume)?

Regards, Pim


> thanks in advance,
> Ernst
> ------
> 
> Fatal trap 12: page fault while in kernel mode
> cpuid = 0; apic id = 00
> fault virtual address   = 0x8
> fault code              = supervisor read, page not present
> instruction pointer     = 0x20:0xc09e7390
> stack pointer           = 0x28:0xe2ca27d4
> frame pointer           = 0x28:0xe2ca27f8
> code segment            = base 0x0, limit 0xfffff, type 0x1b
>                        = DPL 0, pres 1, def32 1, gran 1
> processor eflags        = interrupt enabled, resume, IOPL = 0
> current process         = 11 (irq10: vr0)
> trap number             = 12
> panic: page fault
> cpuid = 0
> Uptime: 1d22h0m53s
> 
> 
> 
> Fatal trap 12: page fault while in kernel mode
> cpuid = 0; apic id = 00
> fault virtual address   = 0xc
> fault code              = supervisor read, page not present
> instruction pointer     = 0x20:0xc09e7381
> stack pointer           = 0x28:0xe2ca2798
> frame pointer           = 0x28:0xe2ca27bc
> code segment            = base 0x0, limit 0xfffff, type 0x1b
>                        = DPL 0, pres 1, def32 1, gran 1
> processor eflags        = interrupt enabled, resume, IOPL = 0
> current process         = 11 (irq10: vr0)
> trap number             = 12
> panic: page fault
> cpuid = 0
> Uptime: 1h28m16s
> 
> 
> 
> Fatal trap 12: page fault while in kernel mode
> cpuid = 0; apic id = 00
> fault virtual address   = 0x40500b8
> fault code              = supervisor read, page not present
> instruction pointer     = 0x20:0xc09e7381
> stack pointer           = 0x28:0xe2ca2798
> frame pointer           = 0x28:0xe2ca27bc
> code segment            = base 0x0, limit 0xfffff, type 0x1b
>                        = DPL 0, pres 1, def32 1, gran 1
> processor eflags        = interrupt enabled, resume, IOPL = 0
> current process         = 11 (irq10: vr0)
> trap number             = 12
> panic: page fault
> cpuid = 0
> Uptime: 2h14m15s
> 
> 
> _______________________________________________
> List mailing list
> List@lists.pfsense.org
> http://lists.pfsense.org/mailman/listinfo/list

_______________________________________________
List mailing list
List@lists.pfsense.org
http://lists.pfsense.org/mailman/listinfo/list

Reply via email to