Am 07.11.2013 13:10, schrieb İhsan Doğan:
My ISP has deployed IPv6 via 6rd, which worked fine in the beginning.
I
have now the issue, that the default route is set on the LAN interface
and I'm not able to ping anything.
The routing table:
default 2a02:1203:ecb7:c20::c105:1d01 UGS em0
::1 ::1 UH lo0
2a02:1200::/28 link#10 U wan_stf
2a02:1203:ecb7:c20:: link#10 UHS lo0 =>
2a02:1203:ecb7:c20::/64 link#1 U em0
2a02:1203:ecb7:c20::1 link#1 UHS lo0
After unconfiguring IPv6 on the LAN/WAN interface and disabling IPv6
routing, I've rebooted my pfSense installation and configured 6rd
again. Now it's working.
I'm now able to reproduce this issue:
- Do a reboot to clean up with IPv6 disabled (including interfaces)
- Configure 6rd on the WAN interface
- Configure IPv6 on the LAN interface (track interface)
- Reboot
After the reboot the IPv6 default gateway will be on the LAN interface.
Ihsan
--
ih...@dogan.ch http://blog.dogan.ch/
_______________________________________________
List mailing list
List@lists.pfsense.org
http://lists.pfsense.org/mailman/listinfo/list
