*ISSUE SOLVED!* I use the VLAN ID in the vSwitch and took off the TAG in the pfSense (just adding a simple interface)
Thanks for the help guys! 2014-07-14 17:43 GMT-03:00 Jonatas Baldin <jonatas.bal...@gmail.com>: > Using the same configuration, but excluding the ESXi host (using a > physical pfSense) it worked smoothly. > > I tried to remove the VLAN ID Tag from the vSwitch, but didn't work too :/ > > > 2014-07-13 23:55 GMT-03:00 Justin Edmands <shockwav...@gmail.com>: > > Here is some interesting info about esxi NICs when used with Cisco, or >> other, VLAN: >> >> "Only allowing through VLAN traffic on physical switch ports >> connecting to ESX reduces TCP/IP overhead. Native VLANs do not tag the >> out going VLAN packets toward ESX NICs and if the same VLAN ID is used >> to configure the vSwitch port group, the vSwitch drops any packet that >> is not tagged for it, causing the connection to fail. Unnecessary VLAN >> traffic on a TRUNK port that connects to ESX can cause major >> performance issues. >> >> Note: Do not use the Native VLAN ID of a physical switch as a VLAN on >> ESX/ESXi portgroups." >> >> Also the link shows the proper Cisco trunk config >> >> >> http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1006628 >> >> On Sun, Jul 13, 2014 at 10:07 PM, Alex Needham <alex.need...@gmail.com> >> wrote: >> > Hi >> > >> > If the port group is already in vlan 10 then you don't need to create a >> vlan >> > in pfsense as the vswitch is already untaging it. >> > >> > Just add teh interface and assign an ip, or set the vswitch to be vlan >> 4095 >> > and it will send tagged traffic through. Which is what I do so that you >> can >> > make changes to pfSense without rebooting to detect a new interface >> that has >> > been added through esx. >> > >> > Also throw an ip on the cisco switch ion vlan 10, that will help you >> trouble >> > shoot the problem. >> > >> > Hope that helps >> > >> > Cheers >> > >> > Alex >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > On 13 July 2014 18:03, Jonatas Baldin <jonatas.bal...@gmail.com> wrote: >> >> >> >> Hi guys, how u doing? >> >> >> >> I'm doing a home lab for VLAN studying and it's going bad. I don't know >> >> where the problem is. >> >> >> >> Here's my setup: >> >> >> >> VMware ESXi 5.5 >> >> pfSense 2.3.4 (VM) >> >> Cisco SF300 >> >> >> >> - The ESXi has o vSwitch attached to a port group in a physical >> interface >> >> with VLAN 10. >> >> - The pfSense has this port group attached and recognizing as em2. >> >> - In the pfSense I created a VLAN interface binding on em2 with de ID >> 10. >> >> - The FW rules are allowed everything in this interface and a DHCP >> server >> >> is configured on the VLAN interface. >> >> - Physically, this em2 interface is connected to the SF300 on a TRUNK >> port >> >> (port 10), with the VLAN 10 allowed. >> >> - And the port 11 is configured as an access port with VLAN 10, where I >> >> connected a laptop expecting to receive a DHCP address and got I ICMP >> >> response which I didn't, even configuring a static IP. >> >> >> >> Does anyone have a clue where the problem is? >> >> >> >> Thx! >> >> ____________________________ >> >> Jonatas Baldin de Oliveira >> >> Profissional de TI >> >> Skype: jonatas.baldin >> >> >> >> >> >> _______________________________________________ >> >> List mailing list >> >> List@lists.pfsense.org >> >> https://lists.pfsense.org/mailman/listinfo/list >> > >> > >> > >> > _______________________________________________ >> > List mailing list >> > List@lists.pfsense.org >> > https://lists.pfsense.org/mailman/listinfo/list >> _______________________________________________ >> List mailing list >> List@lists.pfsense.org >> https://lists.pfsense.org/mailman/listinfo/list >> > > > > -- > ____________________________ > Jonatas Baldin de Oliveira > Profissional de TI > Skype: jonatas.baldin > > -- ____________________________ Jonatas Baldin de Oliveira Profissional de TI Skype: jonatas.baldin
_______________________________________________ List mailing list List@lists.pfsense.org https://lists.pfsense.org/mailman/listinfo/list