On Tue, Aug 5, 2014 at 9:37 AM, Jim Pingle <li...@pingle.org> wrote: > Ensure that the correct interfaces are being chosen, especially if you > have reassigned the traditional WAN/LAN interface roles, since the > "single WAN" wizard would assume that the first interface is WAN, > regardless of what it may have been renamed.
Oh, interesting. In my case, my interfaces look like this: - em0 (802.1q trunk to LAN subnets) - em1 (WAN) Does that mean that I'll need to "reverse" things when going through the wizard? Additionally, not sure if this affects anything, but my WAN address is on a P2P circuit, and my ISP routes a /29 to my WAN IP. I have defined a VIP (IP Alias) which resides in my /29 subnet, and this is the IP I use as my "main egress IP", so all traffic sourced from my network gets NATed to this IP. Again, not sure if this applies to the traffic shaper, but I thought it worth mentioning. -Erik _______________________________________________ List mailing list List@lists.pfsense.org https://lists.pfsense.org/mailman/listinfo/list